PartsTable
Technical Data Sheet
Download PDF

W224561 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

W224561: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1212 OVERALL, nut_style: HEXAGON, nut_height: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-285-2182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W224561
NSN: 5310-00-285-2182
FSC: 5310 — Nuts and Washers
CAGE: 72380 — CROSLEY CORP THE (USA)
SPECIFICATIONS
materialSTEEL COMP 1212 OVERALL
nut_styleHEXAGON
nut_height0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
nominal_thread_size0.250 INCHES IN
bearing_surface_typeWASHER FACED
thread_quantity_per_inch28
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-285-2182
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: W224561 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.250 INCHES IN
•
NUT HEIGHT: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.250 INCHES IN
NUT HEIGHT0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH28
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
QAP00103Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy W224561?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W224561?
W224561 is a NUT,PLAIN,HEXAGON.
What parts can replace W224561?
There is 1 known substitute for W224561: QAP00103. Substitute compatibility should be verified for your specific system.
What is the NSN for W224561?
W224561 is cataloged in the U.S. Government catalog under NSN 5310-00-285-2182. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W224561

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.