PartsTable
Technical Data Sheet
PartsTable / COMPONENT / W205KLL
W205KLL ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, overall_width: 0.8125 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-967-2995, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W205KLL
NSN: 3110-00-967-2995
FSC: 3110
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width0.8125 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
bearing_seal_typeLABYRINTH
lubrication_materialGREASE
overall_outside_diameter52.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-967-2995
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: W205KLL · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 52.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL: GREASE
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SEAL QUANTITY: 2
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH0.8125 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
LUBRICATION MATERIALGREASE
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
INTERNAL FIT-UP DESIGNATIONSTANDARD
SEAL QUANTITY2
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BEARING SEAL TYPELABYRINTH
LOAD DIRECTIONRADIAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 32
21-630Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/09J03B2AInterchangeable
interchangeable cross-reference
interchangeable
A-A-59595Interchangeable
interchangeable cross-reference
interchangeable
45C39Interchangeable
interchangeable cross-reference
interchangeable
302M0114P001Interchangeable
interchangeable cross-reference
interchangeable
A-A-59595-806JEBEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy W205KLL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W205KLL?
W205KLL is a BEARING,BALL,ANNULAR.
What parts can replace W205KLL?
There are 32 known substitutes for W205KLL: 21-630, FF-B-171/09J03B2A, A-A-59595 and 29 more. Substitute compatibility should be verified for your specific system.
Is W205KLL still available?
W205KLL is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W205KLL

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026