PartsTable
Technical Data Sheet
PartsTable / COMPONENT / W201PP
W201PP ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 12.00 MILLIMETERS NOMINAL MM, overall_width: 0.6250 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8048, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W201PP
NSN: 3110-00-293-8048
FSC: 3110
CAGE: 78385 — MEGGITT TROY INC (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter12.00 MILLIMETERS NOMINAL MM
overall_width0.6250 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresW/O GREASE PLUG
style_designatorNON-LOADING GROOVE, NON-SEPARABLE CARTRIDGE TYPE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter32.00 MILLIMETERS NOMINAL MM
NSN3110-00-293-8048
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: W201PP · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 32.00 MILLIMETERS NOMINAL MM
•
SURFACE FINISH: GROUND
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SEAL QUANTITY: 2
•
LUBRICATION MATERIAL: GREASE
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER32.00 MILLIMETERS NOMINAL MM
SPECIAL FEATURESW/O GREASE PLUG
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
SEAL QUANTITY2
LUBRICATION MATERIALGREASE
LOAD DIRECTIONRADIAL
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
21-630Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/09J03B2AInterchangeable
interchangeable cross-reference
interchangeable
A-A-59595Interchangeable
interchangeable cross-reference
interchangeable
45C39Interchangeable
interchangeable cross-reference
interchangeable
302M0114P001Interchangeable
interchangeable cross-reference
interchangeable
A-A-59595-806JEBEInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy W201PP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W201PP?
W201PP is a BEARING,BALL,ANNULAR.
What parts can replace W201PP?
There are 30 known substitutes for W201PP: 21-630, FF-B-171/09J03B2A, A-A-59595 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for W201PP?
W201PP is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-293-8048. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W201PP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026