W0734-009 — WASHER,SPRING TENSION

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

W0734-009: WASHER,SPRING TENSION.

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1095 OVERALL, hole_diameter: 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN, overall_height: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN, outside_diameter: 0.729 INCHES MINIMUM AND 0.739 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, material_thickness: 0.009 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-087-3155, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

W0734-009

NSN: 5310-00-087-3155
FSC: 5310 — Nuts and Washers
CAGE: 92830 — BARNES GROUP INC. DBA ASSOCIATED SPRING DIV ASSOCIATED SPRING BRISTOL (USA)

SPECIFICATIONS

material	STEEL COMP 1095 OVERALL
hole_diameter	0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN
overall_height	0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
outside_diameter	0.729 INCHES MINIMUM AND 0.739 INCHES MAXIMUM IN
surface_treatment	CADMIUM OVERALL
material_thickness	0.009 INCHES NOMINAL IN
material_document_and_classification	MIL-S-7947 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN	5310-00-087-3155

COMPONENT DIAGRAM

KEY FEATURES

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7947 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

•

OUTSIDE DIAMETER: 0.729 INCHES MINIMUM AND 0.739 INCHES MAXIMUM IN

•

MATERIAL THICKNESS: 0.009 INCHES NOMINAL IN

•

SURFACE TREATMENT: CADMIUM OVERALL

•

MATERIAL: STEEL COMP 1095 OVERALL

•

HOLE DIAMETER: 0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7947 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER	0.729 INCHES MINIMUM AND 0.739 INCHES MAXIMUM IN
MATERIAL THICKNESS	0.009 INCHES NOMINAL IN
SURFACE TREATMENT	CADMIUM OVERALL
MATERIAL	STEEL COMP 1095 OVERALL
HOLE DIAMETER	0.526 INCHES MINIMUM AND 0.536 INCHES MAXIMUM IN

SUBSTITUTES & CROSS-REFERENCES 8

WO734-009Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

807-1700 PIECE 17Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

R5Reference document

Same NSN cross-reference

Reference document — Secondary reference

146686Reference document

Same NSN cross-reference

Reference document — Secondary reference

980126-4Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

807-1700-17Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy W0734-009?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is W0734-009?

W0734-009 is a WASHER,SPRING TENSION.

What parts can replace W0734-009?

There are 8 known substitutes for W0734-009: WO734-009, 807-1700 PIECE 17, R5 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for W0734-009?

W0734-009 is cataloged in the U.S. Government catalog under NSN 5310-00-087-3155. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

W0734-009 — WASHER,SPRING TENSION

Request a Quote — W0734-009