PartsTable
Technical Data Sheet
PartsTable / COMPONENT / W033116
W033116 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,NONMETALLIC ROUND SECTION is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, construction: SPLIT, special_features: 0TO300 DEG F TEMP RANGE, style_designator: CIRCULAR, aperture_diameter: 6.625 INCHES NOMINAL IN, fabrication_method: SOLID. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-245-3398, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W033116
NSN: 5330-00-245-3398
FSC: 5330
CAGE: 32510 — GETINGE USA INC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
constructionSPLIT
special_features0TO300 DEG F TEMP RANGE
style_designatorCIRCULAR
aperture_diameter6.625 INCHES NOMINAL IN
fabrication_methodSOLID
cross-sectional_shape_styleCIRCULAR WITH CENTER APERTURE
cross_section_inside_diameter0.062 INCHES NOMINAL IN
cross_section_outside_diameter0.250 INCHES NOMINAL IN
NSN5330-00-245-3398
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: W033116 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
APERTURE DIAMETER: 6.625 INCHES NOMINAL IN
•
CROSS SECTION OUTSIDE DIAMETER: 0.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS SECTION INSIDE DIAMETER: 0.062 INCHES NOMINAL IN
•
CONSTRUCTION: SPLIT
•
FABRICATION METHOD: SOLID
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER6.625 INCHES NOMINAL IN
CROSS SECTION OUTSIDE DIAMETER0.250 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
CROSS SECTION INSIDE DIAMETER0.062 INCHES NOMINAL IN
CONSTRUCTIONSPLIT
SPECIAL FEATURES0TO300 DEG F TEMP RANGE
FABRICATION METHODSOLID
CROSS-SECTIONAL SHAPE STYLECIRCULAR WITH CENTER APERTURE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
HS101Interchangeable
interchangeable cross-reference
interchangeable
24108Interchangeable
interchangeable cross-reference
interchangeable
33-116Interchangeable
interchangeable cross-reference
interchangeable
142A31Interchangeable
interchangeable cross-reference
interchangeable
B1001602Interchangeable
interchangeable cross-reference
interchangeable
SCB105074Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy W033116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W033116?
W033116 is a SEAL,NONMETALLIC ROUND SECTION.
What parts can replace W033116?
There are 14 known substitutes for W033116: HS101, 24108, 33-116 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for W033116?
W033116 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-245-3398. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W033116

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026