PartsTable
Technical Data Sheet
Download PDF

W011001-007 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

W011001-007: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT, case_style: SQUARE, seal_width: 0.438 INCHES NOMINAL IN, temp_rating: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, housing_bore_diameter: 4.247 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN, sealing_element_style: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-069-5120, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W011001-007
NSN: 5330-01-069-5120
FSC: 5330 — Packing and Gasket Materials
CAGE: 17904 — DINGS CO DIV OF VENTUREDYNE LTD (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
case_styleSQUARE
seal_width0.438 INCHES NOMINAL IN
temp_rating-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
housing_bore_diameter4.247 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter3.250 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed2500 FEET PER MINUTE FT
NSN5330-01-069-5120
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: W011001-007 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
SEAL WIDTH: 0.438 INCHES NOMINAL IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 4.247 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN
•
ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 2500 FEET PER MINUTE FT
•
CASE STYLE: SQUARE
•
ACCOMMODATED SHAFT DIAMETER: 3.250 INCHES NOMINAL IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
TECHNICAL CHARACTERISTICS
TEMP RATING-65.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
SEAL WIDTH0.438 INCHES NOMINAL IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER4.247 INCHES MINIMUM AND 4.250 INCHES MAXIMUM IN
ACCOMMODATED SHAFT MAXIMUM RATED SPEED2500 FEET PER MINUTE FT
CASE STYLESQUARE
ACCOMMODATED SHAFT DIAMETER3.250 INCHES NOMINAL IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEALING ELEMENT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
11-1-7Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy W011001-007?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W011001-007?
W011001-007 is a SEAL,PLAIN ENCASED.
What parts can replace W011001-007?
There is 1 known substitute for W011001-007: 11-1-7. Substitute compatibility should be verified for your specific system.
What is the NSN for W011001-007?
W011001-007 is cataloged in the U.S. Government catalog under NSN 5330-01-069-5120. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W011001-007