PartsTable
Technical Data Sheet
PartsTable / COMPONENT / W004004-001C
W004004-001C ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, thickness: 0.047 INCHES NOMINAL IN, hole_diameter: 0.656 INCHES NOMINAL IN, overall_diameter: 1.125 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-433-6852, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W004004-001C
NSN: 5310-01-433-6852
FSC: 5310
CAGE: 17904 — DINGS CO DIV OF VENTUREDYNE LTD (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
thickness0.047 INCHES NOMINAL IN
hole_diameter0.656 INCHES NOMINAL IN
overall_diameter1.125 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-433-6852
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: W004004-001C · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 1.125 INCHES NOMINAL IN
•
THICKNESS: 0.047 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CENTER HOLE SHAPE STYLE: ROUND
•
MATERIAL: STEEL COMP 304 OVERALL
•
HOLE DIAMETER: 0.656 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER1.125 INCHES NOMINAL IN
THICKNESS0.047 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
MATERIALSTEEL COMP 304 OVERALL
HOLE DIAMETER0.656 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
141CCAPACIT0RInterchangeable
interchangeable cross-reference
interchangeable
441CCAPACIT0RInterchangeable
interchangeable cross-reference
interchangeable
141CInterchangeable
interchangeable cross-reference
interchangeable
453009B6Interchangeable
interchangeable cross-reference
interchangeable
441CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy W004004-001C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W004004-001C?
W004004-001C is a WASHER,FLAT.
What parts can replace W004004-001C?
There are 5 known substitutes for W004004-001C: 141CCAPACIT0R, 441CCAPACIT0R, 141C and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for W004004-001C?
W004004-001C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-01-433-6852. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W004004-001C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026