PartsTable
Technical Data Sheet
PartsTable / COMPONENT / W-11110-4
W-11110-4 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, thread_length: 0.438 INCHES MINIMUM IN, screw_material: STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-039-0230, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
W-11110-4
NSN: 5305-01-039-0230
FSC: 5305
CAGE: 28835 — HOBART BROS CO (USA)
SPECIFICATIONS
head_styleROUND
head_height0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
thread_length0.438 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.500 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentZINC
thread_quantity_per_inch32
NSN5305-01-039-0230
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: W-11110-4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.438 INCHES MINIMUM IN
•
THREAD CLASS: 2A A
•
HEAD STYLE: ROUND
•
SCREW MATERIAL: STEEL
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW SURFACE TREATMENT: ZINC
•
NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.438 INCHES MINIMUM IN
THREAD CLASS2A A
HEAD STYLEROUND
SCREW MATERIALSTEEL
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW SURFACE TREATMENTZINC
NOMINAL THREAD DIAMETER0.138 INCHES IN
THREAD DIRECTIONRIGHT-HAND
FASTENER LENGTH0.500 INCHES NOMINAL IN
HEAD HEIGHT0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
852576Interchangeable
interchangeable cross-reference
interchangeable
602071Interchangeable
interchangeable cross-reference
interchangeable
18148Interchangeable
interchangeable cross-reference
interchangeable
PA22000Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy W-11110-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is W-11110-4?
W-11110-4 is a SCREW,MACHINE.
What parts can replace W-11110-4?
There are 5 known substitutes for W-11110-4: 852576, 602071, 18148 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for W-11110-4?
W-11110-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-039-0230. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — W-11110-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026