PartsTable
Technical Data Sheet
Download PDF

VS7004-5-2 — NUT SPACER,PLATE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

VS7004-5-2: NUT SPACER,PLATE.

The NUT SPACER,PLATE is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 7075 OVERALL, nut_style: PLATE NUT SPACER, nut_length: 1.257 INCHES NOMINAL IN, plate_width: 0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN, plate_thickness: 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN, surface_treatment: ANODIZE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-124-9207, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VS7004-5-2
NSN: 5310-00-124-9207
FSC: 5310 — Nuts and Washers
CAGE: 06950 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY 7075 OVERALL
nut_stylePLATE NUT SPACER
nut_length1.257 INCHES NOMINAL IN
plate_width0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
plate_thickness0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
surface_treatmentANODIZE OVERALL
thru-hole_diameter0.328 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
mounting_hole_diameter0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
nut_mounting_provisionSTRAIGHT HOLES
mounting_hole_arrangement_style2 HOLES
material_document_and_classificationALLOY 7075,TEMPER T6 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-124-9207
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: VS7004-5-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PLATE THICKNESS: 0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
•
NUT LENGTH: 1.257 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PLATE WIDTH: 0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
•
MOUNTING HOLE ARRANGEMENT STYLE: 2 HOLES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ALLOY 7075,TEMPER T6 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MOUNTING HOLE DIAMETER: 0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER: 0.427 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
PLATE THICKNESS0.018 INCHES MINIMUM AND 0.022 INCHES MAXIMUM IN
NUT LENGTH1.257 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
PLATE WIDTH0.650 INCHES MINIMUM AND 0.670 INCHES MAXIMUM IN
MOUNTING HOLE ARRANGEMENT STYLE2 HOLES
MATERIAL DOCUMENT AND CLASSIFICATIONALLOY 7075,TEMPER T6 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MOUNTING HOLE DIAMETER0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER0.427 INCHES MINIMUM AND 0.457 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH0.873 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
THRU-HOLE DIAMETER0.328 INCHES MINIMUM AND 0.335 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy VS7004-5-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VS7004-5-2?
VS7004-5-2 is a NUT SPACER,PLATE.
What is the NSN for VS7004-5-2?
VS7004-5-2 is cataloged in the U.S. Government catalog under NSN 5310-00-124-9207. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VS7004-5-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.