VS3324-07012 — BOLT,CLOSE TOLERANCE

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

VS3324-07012: BOLT,CLOSE TOLERANCE.

The BOLT,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: SPLINE EXTENDED WASHER, grip_length: 0.750 INCHES NOMINAL IN, head_height: 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-185-7128, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

VS3324-07012

NSN: 5306-01-185-7128
FSC: 5306 — Bolts
CAGE: 06950 — HOWMET GLOBAL FASTENING SYSTEMS INC (USA)

SPECIFICATIONS

material	STEEL COMP H11 OVERALL
head_style	SPLINE EXTENDED WASHER
grip_length	0.750 INCHES NOMINAL IN
head_height	0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
thread_class	3A A
grip_diameter	0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM IN
thread_length	0.966 INCHES NOMINAL IN
surface_finish	32.0 MICROINCHES BEARING SURFACE OF HEAD
fastener_length	1.701 INCHES MINIMUM AND 1.731 INCHES MAXIMUM IN
hardness_rating	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
thread_direction	RIGHT-HAND
surface_treatment	CADMIUM AND CHROMATE OVERALL
NSN	5306-01-185-7128

COMPONENT DIAGRAM

KEY FEATURES

•

SURFACE FINISH: 32.0 MICROINCHES GRIP

•

EXTENDED WASHER THICKNESS: 0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

HEAD HEIGHT: 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.701 INCHES MINIMUM AND 1.731 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL

•

EXTENDED WASHER DIAMETER: 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM IN

•

THREAD LENGTH: 0.966 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
EXTENDED WASHER THICKNESS	0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HEAD HEIGHT	0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
FASTENER LENGTH	1.701 INCHES MINIMUM AND 1.731 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-8837,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
EXTENDED WASHER DIAMETER	0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM IN
THREAD LENGTH	0.966 INCHES NOMINAL IN
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

SUBSTITUTES & CROSS-REFERENCES 2

C9698-07012Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

123593Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy VS3324-07012?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is VS3324-07012?

VS3324-07012 is a BOLT,CLOSE TOLERANCE.

What parts can replace VS3324-07012?

There are 2 known substitutes for VS3324-07012: C9698-07012, 123593. Substitute compatibility should be verified for your specific system.

What is the NSN for VS3324-07012?

VS3324-07012 is cataloged in the U.S. Government catalog under NSN 5306-01-185-7128. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

VS3324-07012 — BOLT,CLOSE TOLERANCE

Request a Quote — VS3324-07012