PartsTable
Technical Data Sheet
Download PDF

VS15404-16 — PACKING WITH RETAINER

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

VS15404-16: PACKING WITH RETAINER.

The PACKING WITH RETAINER is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-STYRENE CLASS SBR PACKING, construction: TWO-PIECE, outside_diameter: 1.750 INCHES NOMINAL IN, surface_treatment: ANODIZE RETAINER, retainer_thickness: 0.081 INCHES NOMINAL IN, packing_inside_diameter: 0.900 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-898-4536, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VS15404-16
NSN: 5330-00-898-4536
FSC: 5330 — Packing and Gasket Materials
CAGE: 77272 — THE BOEING COMPANY (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-STYRENE CLASS SBR PACKING
constructionTWO-PIECE
outside_diameter1.750 INCHES NOMINAL IN
surface_treatmentANODIZE RETAINER
retainer_thickness0.081 INCHES NOMINAL IN
packing_inside_diameter0.900 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
material_document_and_classificationMIL-R-6855 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
surface_treatment_document_and_classificationMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE RETAINER
NSN5330-00-898-4536
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: VS15404-16 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE RETAINER
•
PACKING INSIDE DIAMETER: 0.900 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.750 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
•
RETAINER THICKNESS: 0.081 INCHES NOMINAL IN
•
SURFACE TREATMENT: ANODIZE RETAINER
•
MATERIAL: ALUMINUM ALLOY 6061 RETAINER
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE RETAINER
PACKING INSIDE DIAMETER0.900 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.750 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE RETAINER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-6855 MIL SPEC SINGLE MATERIAL RESPONSE PACKING
RETAINER THICKNESS0.081 INCHES NOMINAL IN
SURFACE TREATMENTANODIZE RETAINER
MATERIALALUMINUM ALLOY 6061 RETAINER
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER CHLOROPRENE CLASS CR OR RUBBER BUTADIENE-STYRENE CLASS SBR PACKING
CONSTRUCTIONTWO-PIECE
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy VS15404-16?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VS15404-16?
VS15404-16 is a PACKING WITH RETAINER.
What is the NSN for VS15404-16?
VS15404-16 is cataloged in the U.S. Government catalog under NSN 5330-00-898-4536. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VS15404-16

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.