PartsTable
Technical Data Sheet
PartsTable / COMPONENT / VPC-860-SSPIN
VPC-860-SSPIN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HANDLE,LUGGAGE is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 360 OVERALL, thread_class: 2A A, mounting_method: THREADED STUD(S), surface_treatment: CHROMIUM OVERALL, nominal_thread_size: 0.375 INCHES IN, mounting_facility_length: 0.625 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-526-3923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VPC-860-SSPIN
NSN: 5340-00-526-3923
FSC: 5340
CAGE: 08730 — VEMALINE PRODUCTS INC DBA HANDLES UNLIMITED DIV HANDLES UNLIMITED (USA)
SPECIFICATIONS
materialCOPPER ALLOY 360 OVERALL
thread_class2A A
mounting_methodTHREADED STUD(S)
surface_treatmentCHROMIUM OVERALL
nominal_thread_size0.375 INCHES IN
mounting_facility_length0.625 INCHES NOMINAL IN
thread_series_designatorUNF
mounting_facility_quantity2
material_document_and_classificationQQ-B-626,ALLOY 360,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-C-320,CLASS 1,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
center_to_center_distance_between_mounting_facilities_parallel_to_length4.000 INCHES NOMINAL IN
NSN5340-00-526-3923
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: VPC-860-SSPIN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,ALLOY 360,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-C-320,CLASS 1,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING FACILITY LENGTH: 0.625 INCHES NOMINAL IN
•
MOUNTING METHOD: THREADED STUD(S)
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH: 4.000 INCHES NOMINAL IN
•
MOUNTING FACILITY QUANTITY: 2
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-626,ALLOY 360,1/2H FED SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-C-320,CLASS 1,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING FACILITY LENGTH0.625 INCHES NOMINAL IN
MOUNTING METHODTHREADED STUD(S)
NOMINAL THREAD SIZE0.375 INCHES IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH4.000 INCHES NOMINAL IN
MOUNTING FACILITY QUANTITY2
THREAD CLASS2A A
SURFACE TREATMENTCHROMIUM OVERALL
THREAD SERIES DESIGNATORUNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
114Upgraded Successor
successor cross-reference
successor
1114Upgraded Successor
successor cross-reference
successor
1A1A1Upgraded Successor
successor cross-reference
successor
VPC-860Interchangeable
Same NIIN cross-reference
interchangeable
93-415-1900-01-00-01Interchangeable
Same NIIN cross-reference
interchangeable
12090B3724-25AInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy VPC-860-SSPIN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VPC-860-SSPIN?
VPC-860-SSPIN is a HANDLE,LUGGAGE.
What parts can replace VPC-860-SSPIN?
There are 9 known substitutes for VPC-860-SSPIN: 114, 1114, 1A1A1 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for VPC-860-SSPIN?
VPC-860-SSPIN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-526-3923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VPC-860-SSPIN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026