PartsTable
Technical Data Sheet
Download PDF

VP1119-5-17 — SCREW,CLOSE TOLERANCE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

VP1119-5-17: SCREW,CLOSE TOLERANCE.

The SCREW,CLOSE TOLERANCE is a the manufacturer industrial component. Key specifications include grip_length: 1.062 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN, head_height: 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN, hardness_rating: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL, width_between_flats: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN, shank_unthreaded_hole_diameter: 0.076 INCHES MINIMUM AND 1.086 INCHES MAXIMUM FIRST HOLE IN, part_name_assigned_by_controlling_agency: NAVY SPECIAL PROJECT. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-151-7988, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VP1119-5-17
NSN: 5305-00-151-7988
FSC: 5305 — Screws
CAGE: 92215 — HOWMET GLOBAL FASTENING SYSTEMS INC DIV TORRANCE OPERATIONS (USA)
SPECIFICATIONS
grip_length1.062 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
head_height0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
hardness_rating39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
width_between_flats0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
shank_unthreaded_hole_diameter0.076 INCHES MINIMUM AND 1.086 INCHES MAXIMUM FIRST HOLE IN
part_name_assigned_by_controlling_agencyNAVY SPECIAL PROJECT
distance_from_head_largest_bearing_surface_to_shank_hole_center1.437 INCHES MINIMUM AND 1.453 INCHES MAXIMUM FIRST HOLE IN
NSN5305-00-151-7988
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: VP1119-5-17 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
•
HARDNESS RATING: 39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
•
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 1.086 INCHES MAXIMUM FIRST HOLE IN
•
GRIP LENGTH: 1.062 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
•
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
•
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.437 INCHES MINIMUM AND 1.453 INCHES MAXIMUM FIRST HOLE IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.157 INCHES MINIMUM AND 0.172 INCHES MAXIMUM IN
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 1.086 INCHES MAXIMUM FIRST HOLE IN
GRIP LENGTH1.062 INCHES MINIMUM AND 1.078 INCHES MAXIMUM IN
WIDTH BETWEEN FLATS0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.437 INCHES MINIMUM AND 1.453 INCHES MAXIMUM FIRST HOLE IN
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 2
511AE5-17Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
AS108-05-17Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy VP1119-5-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VP1119-5-17?
VP1119-5-17 is a SCREW,CLOSE TOLERANCE.
What parts can replace VP1119-5-17?
There are 2 known substitutes for VP1119-5-17: 511AE5-17, AS108-05-17. Substitute compatibility should be verified for your specific system.
What is the NSN for VP1119-5-17?
VP1119-5-17 is cataloged in the U.S. Government catalog under NSN 5305-00-151-7988. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VP1119-5-17

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.