PartsTable
Technical Data Sheet
PartsTable / COMPONENT / VP-875
VP-875 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUG,VENT is a the manufacturer industrial component. Key specifications include color: BLUE, length: 30.000 INCHES NOMINAL IN, material: PLASTIC POLYPROPYLENE SUTURE, sterility: STERILE, inside_diameter: 0.875 INCHES NOMINAL IN, size_designator: 7-0. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-039-5104, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VP-875
NSN: 5340-01-039-5104
FSC: 5340
CAGE: 28520 — HEYCO INC DBA HEYCO PRODUCTS (USA)
SPECIFICATIONS
colorBLUE
length30.000 INCHES NOMINAL IN
materialPLASTIC POLYPROPYLENE SUTURE
sterilitySTERILE
inside_diameter0.875 INCHES NOMINAL IN
size_designator7-0
outside_diameter0.953 INCHES NOMINAL IN
end_connection_typeUNTHREADED
needle_type_designatorMV175-9
immediate_container_typeBOX
strand_fiber_arrangementMONOFILAMENT
immediate_container_quantity1
NSN5340-01-039-5104
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: VP-875 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 0.953 INCHES NOMINAL IN
•
END CONNECTION TYPE: UNTHREADED
•
LENGTH: 0.453 INCHES NOMINAL IN
•
INSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYAMIDE NYLON
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER0.953 INCHES NOMINAL IN
END CONNECTION TYPEUNTHREADED
LENGTH0.453 INCHES NOMINAL IN
INSIDE DIAMETER0.875 INCHES NOMINAL IN
MATERIALPLASTIC POLYAMIDE NYLON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
VP875Upgraded Successor
successor cross-reference
successor
2697BRInterchangeable
interchangeable cross-reference
interchangeable
2697-5Interchangeable
interchangeable cross-reference
interchangeable
2697Interchangeable
interchangeable cross-reference
interchangeable
MM9106Interchangeable
interchangeable cross-reference
interchangeable
734-31Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy VP-875?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VP-875?
VP-875 is a PLUG,VENT.
What parts can replace VP-875?
There are 17 known substitutes for VP-875: VP875, 2697BR, 2697-5 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for VP-875?
VP-875 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-039-5104. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VP-875

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026