PartsTable
Technical Data Sheet
Download PDF

VMVLNL-12-3 — HOLDER,CUTTING TOOL

✓ Government record, cited
— · COMPONENT
PRODUCT OVERVIEW

VMVLNL-12-3: HOLDER,CUTTING TOOL.

The HOLDER,CUTTING TOOL is a the manufacturer industrial component. Key specifications include diameter: 0.375 INCHES NOMINAL IN, thickness: 0.187 INCHES NOMINAL IN, design_type: TURNING, holder_type: LEFT HAND OFFSET, shank_width: 1.000 INCHES NOMINAL IN, shank_height: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3460-01-050-0987, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VMVLNL-12-3
NSN: 3460-01-050-0987
FSC: 3460 — Machine Tool Accessories
CAGE: 29125 — VALENITE INC (USA)
SPECIFICATIONS
diameter0.375 INCHES NOMINAL IN
thickness0.187 INCHES NOMINAL IN
design_typeTURNING
holder_typeLEFT HAND OFFSET
shank_width1.000 INCHES NOMINAL IN
shank_height0.750 INCHES NOMINAL IN
shank_length4.500 INCHES NOMINAL IN
special_featuresLEFT HANDED TOOLHOLDER;USES VNMG-332 INSERTS
cutting_tool_shapeFLAT TRIANGULAR INSERT
spring_type_featureNOT INCLUDED
cutter_tool_accommodatedCUTTER BIT
NSN3460-01-050-0987
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available HOLDER,CUTTING TOOL TITLE COMPONENT PN VMVLNL-12-3 MFR HOLDER,CUTTING TOOL
KEY FEATURES
•
HOLDER TYPE: LEFT HAND OFFSET
•
DESIGN TYPE: TURNING
•
SHANK HEIGHT: 0.750 INCHES NOMINAL IN
•
SHANK LENGTH: 4.500 INCHES NOMINAL IN
•
DIAMETER: 0.375 INCHES NOMINAL IN
•
SHANK WIDTH: 1.000 INCHES NOMINAL IN
•
CUTTING TOOL SHAPE: FLAT TRIANGULAR INSERT
•
CUTTER TOOL ACCOMMODATED: CUTTER BIT
TECHNICAL CHARACTERISTICS
HOLDER TYPELEFT HAND OFFSET
DESIGN TYPETURNING
SHANK HEIGHT0.750 INCHES NOMINAL IN
SHANK LENGTH4.500 INCHES NOMINAL IN
DIAMETER0.375 INCHES NOMINAL IN
SHANK WIDTH1.000 INCHES NOMINAL IN
CUTTING TOOL SHAPEFLAT TRIANGULAR INSERT
CUTTER TOOL ACCOMMODATEDCUTTER BIT
SPECIAL FEATURESLEFT HANDED TOOLHOLDER;USES VNMG-332 INSERTS
SPRING TYPE FEATURENOT INCLUDED
SUBSTITUTES & CROSS-REFERENCES 4
MVJNL-12-3-BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ANSI B212.3Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
MVLNL-12-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
DVJNL-123BReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy VMVLNL-12-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VMVLNL-12-3?
VMVLNL-12-3 is a HOLDER,CUTTING TOOL.
What parts can replace VMVLNL-12-3?
There are 4 known substitutes for VMVLNL-12-3: MVJNL-12-3-B, ANSI B212.3, MVLNL-12-3 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for VMVLNL-12-3?
VMVLNL-12-3 is cataloged in the U.S. Government catalog under NSN 3460-01-050-0987. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VMVLNL-12-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.