PartsTable
Technical Data Sheet
Download PDF

VM128 2-270 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

VM128 2-270: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include special_features: 1/8 WIDTH 75 DUROMETER AS568A-270, center_hole_diameter: 9.000 INCHES NOMINAL IN, end_item_identification: NSN: 6665-01-452-9644, part_name_assigned_by_controlling_agency: O-RING,VITON. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-551-9374, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VM128 2-270
NSN: 5331-01-551-9374
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
special_features1/8 WIDTH 75 DUROMETER AS568A-270
center_hole_diameter9.000 INCHES NOMINAL IN
end_item_identificationNSN: 6665-01-452-9644
part_name_assigned_by_controlling_agencyO-RING,VITON
NSN5331-01-551-9374
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: VM128 2-270 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 9.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SPECIAL FEATURES1/8 WIDTH 75 DUROMETER AS568A-270
CENTER HOLE DIAMETER9.000 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING,VITON
END ITEM IDENTIFICATIONNSN: 6665-01-452-9644
SUBSTITUTES & CROSS-REFERENCES 5
10080388Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
30295-2000PLReference document
Same NSN cross-reference
Reference document — Secondary reference
2-270V835-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-270VM835-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
VM835 2-270Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy VM128 2-270?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VM128 2-270?
VM128 2-270 is a O-RING.
What parts can replace VM128 2-270?
There are 5 known substitutes for VM128 2-270: 10080388, 30295-2000PL, 2-270V835-75 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for VM128 2-270?
VM128 2-270 is cataloged in the U.S. Government catalog under NSN 5331-01-551-9374. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VM128 2-270