PartsTable
Technical Data Sheet
PartsTable / COMPONENT / VH20306-5A
VH20306-5A ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 30.0 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 19.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-461-5385, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VH20306-5A
NSN: 3110-00-461-5385
FSC: 3110
CAGE: 43334 — GENERAL MOTORS CORP DELCO MORAINE NDH DIV (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter30.0 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width19.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter72.0 MILLIMETERS NOMINAL MM
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.5
NSN3110-00-461-5385
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: VH20306-5A · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
MATERIAL: COPPER ALLOY RETAINER
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
TECHNICAL CHARACTERISTICS (FLIS)
CONTACT ANGLE25.0 DEGREES MAXIMUM
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALCOPPER ALLOY RETAINER
MATERIALSTEEL BALL
MATERIALSTEEL INNER RING
MATERIALSTEEL OUTER RING
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
RETAINER FABRICATION METHODPRESSED
LOAD DIRECTIONANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
9454109Interchangeable
interchangeable cross-reference
interchangeable
6751-5Interchangeable
interchangeable cross-reference
interchangeable
9454109-33Interchangeable
interchangeable cross-reference
interchangeable
301T2100N(M1)Interchangeable
interchangeable cross-reference
interchangeable
5668Interchangeable
interchangeable cross-reference
interchangeable
1239-004-A001-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy VH20306-5A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VH20306-5A?
VH20306-5A is a BEARING,BALL,ANNULAR.
What parts can replace VH20306-5A?
There are 17 known substitutes for VH20306-5A: 9454109, 6751-5, 9454109-33 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for VH20306-5A?
VH20306-5A is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-461-5385. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VH20306-5A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026