PartsTable
Technical Data Sheet
Download PDF

VG4385-14 — STRAP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

VG4385-14: STRAP,RETAINING.

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include material: STEEL UNS K02600 LOCATION NOT OTHERWISE SPECIFIED, overall_width: 1.000 INCHES NOMINAL IN, overall_length: 9.000 INCHES NOMINAL IN, style_designator: STRAIGHT ARCH, material_thickness: 0.250 INCHES NOMINAL IN, mounting_hole_size: 0.437 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-549-2416, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VG4385-14
NSN: 5340-01-549-2416
FSC: 5340 — Hardware, Commercial
CAGE: 1DA54 — THE HILLER COMPANIES LLC (USA)
SPECIFICATIONS
materialSTEEL UNS K02600 LOCATION NOT OTHERWISE SPECIFIED
overall_width1.000 INCHES NOMINAL IN
overall_length9.000 INCHES NOMINAL IN
style_designatorSTRAIGHT ARCH
material_thickness0.250 INCHES NOMINAL IN
mounting_hole_size0.437 INCHES NOMINAL IN
end_item_identificationSHAFT SEAL INFLATER/CO2 CHARGING ASSEMBLY
distance_between_base_and_inside_of_arch0.750 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCYLINDER STRAP
NSN5340-01-549-2416
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: VG4385-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE SIZE: 0.437 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT ARCH
•
MATERIAL THICKNESS: 0.250 INCHES NOMINAL IN
•
DISTANCE BETWEEN BASE AND INSIDE OF ARCH: 0.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE SIZE0.437 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT ARCH
OVERALL LENGTH9.000 INCHES NOMINAL IN
OVERALL WIDTH1.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.250 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH0.750 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYCYLINDER STRAP
END ITEM IDENTIFICATIONSHAFT SEAL INFLATER/CO2 CHARGING ASSEMBLY
MATERIALSTEEL UNS K02600 LOCATION NOT OTHERWISE SPECIFIED
SUBSTITUTES & CROSS-REFERENCES 2
VG4385Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
FP101-VG4385PC14Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy VG4385-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VG4385-14?
VG4385-14 is a STRAP,RETAINING.
What parts can replace VG4385-14?
There are 2 known substitutes for VG4385-14: VG4385, FP101-VG4385PC14. Substitute compatibility should be verified for your specific system.
What is the NSN for VG4385-14?
VG4385-14 is cataloged in the U.S. Government catalog under NSN 5340-01-549-2416. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VG4385-14