PartsTable
Technical Data Sheet
Download PDF

VDH951G1-062 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

VDH951G1-062: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include hole_diameter: 0.187 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 2.000 INCHES NOMINAL IN, overall_length: 2.000 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.062 INCHES NOMINAL IN, outside_edge_to_bolt_hole_center_distance_along_width: 0.187 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-264-7319, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VDH951G1-062
NSN: 5330-01-264-7319
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
hole_diameter0.187 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width2.000 INCHES NOMINAL IN
overall_length2.000 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.062 INCHES NOMINAL IN
bolt_hole_quantity4
outside_edge_to_bolt_hole_center_distance_along_width0.187 INCHES NOMINAL IN
outside_edge_to_bolt_hole_center_distance_along_length0.187 INCHES NOMINAL IN
center_to_center_distance_between_bolt_holes_along_width1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-01-264-7319
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: VDH951G1-062 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-CIRCULAR
•
APERTURE DIAMETER: 1.062 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.187 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH2.000 INCHES NOMINAL IN
OVERALL WIDTH2.000 INCHES NOMINAL IN
APERTURE DIAMETER1.062 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.625 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.187 INCHES NOMINAL IN
HOLE DIAMETER0.187 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.187 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
VDH-95AG-1.062Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy VDH951G1-062?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VDH951G1-062?
VDH951G1-062 is a GASKET.
What parts can replace VDH951G1-062?
There is 1 known substitute for VDH951G1-062: VDH-95AG-1.062. Substitute compatibility should be verified for your specific system.
What is the NSN for VDH951G1-062?
VDH951G1-062 is cataloged in the U.S. Government catalog under NSN 5330-01-264-7319. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VDH951G1-062

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.