PartsTable
Technical Data Sheet
PartsTable / MRO / VBE725E47KK

VBE725E47KK — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Verify manufacturer and server generation compatibility Check if Option PN or Spare PN — same part, different channel
Confirm exact part number — similar PNs may be different parts
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: CERAMIC CASE, body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 0.390 INCHES NOMINAL IN, body_diameter: 0.140 INCHES NOMINAL IN, terminal_length: 1.500 INCHES MINIMUM IN, terminal_diameter: 0.015 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 5910-00-717-3520, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ VBE725E47KK
NSN: 5910-00-717-3520
FSC: 5910
CAGE: H0203 — THALES NEDERLAND (NLD)
SPECIFICATIONS
materialCERAMIC CASE
body_styleW/O MTG FACILITIES, AXIAL TERMINALS
body_length0.390 INCHES NOMINAL IN
body_diameter0.140 INCHES NOMINAL IN
terminal_length1.500 INCHES MINIMUM IN
terminal_diameter0.015 INCHES MINIMUM AND 0.027 INCHES MAXIMUM IN
reliability_indicatorESTABLISHED
nonderated_operating_temp-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_type_and_quantity2 UNINSULATED WIRE LEAD
specification/standard_data81349-MIL-C-39014/5B GOVERNMENT SPECIFICATION
tolerance_range_per_section-10.00 TO 10.00 PERCENT SINGLE SECTION
schematic_diagram_designatorNO COMMON OR GROUNDED ELECTRODE(S)
NSN5910-00-717-3520
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available CAPACITOR,FIXED,CERAMIC DIELECTR TITLE COMPONENT PN VBE725E47KK MFR CAPACITOR,FIXED,CERAMI
KEY FEATURES
•
TOLERANCE RANGE PER SECTION: -10.00 TO 10.00 PERCENT SINGLE SECTION
•
CAPACITANCE VALUE PER SECTION: 47000.000 PICOFARADS SINGLE SECTION
•
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE: -15.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
•
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION: 100.0 DC SINGLE SECTION
•
MATERIAL: CERAMIC CASE
•
INSULATION RESISTANCE AT REFERENCE TEMP: 1000.0 MEGOHM-MICROFARADS
•
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT: 2.5000
•
TEST DATA DOCUMENT: 81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
TOLERANCE RANGE PER SECTION-10.00 TO 10.00 PERCENT SINGLE SECTION
CAPACITANCE VALUE PER SECTION47000.000 PICOFARADS SINGLE SECTION
VOLTAGE TEMP LIMITS PER SECTION IN PERCENT CAPACITANCE CHANGE-15.0 TO 15.0 WITH RATED VOLTAGE APPLIED SINGLE SECTION
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION100.0 DC SINGLE SECTION
MATERIALCERAMIC CASE
INSULATION RESISTANCE AT REFERENCE TEMP1000.0 MEGOHM-MICROFARADS
DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT2.5000
TEST DATA DOCUMENT81349-MIL-C-39014 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
SCHEMATIC DIAGRAM DESIGNATORNO COMMON OR GROUNDED ELECTRODE(S)
RELIABILITY INDICATORESTABLISHED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
MILC11015-20InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
352250008411InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
947809-4423InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1860104-190InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
570-95BInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
352250004096InterchangeableGOVERNMENT REGISTRY
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy VBE725E47KK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VBE725E47KK?
VBE725E47KK is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace VBE725E47KK?
There are 10 known substitutes for VBE725E47KK: MILC11015-20, 352250008411, 947809-4423 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for VBE725E47KK?
VBE725E47KK is cataloged in the Federal Logistics Information System under NSN 5910-00-717-3520. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VBE725E47KK

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026