PartsTable
Technical Data Sheet
Download PDF

VAL22034-6F8 — BOLT,SHEAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

VAL22034-6F8: BOLT,SHEAR.

The BOLT,SHEAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP H11 OVERALL, head_style: DOUBLE HEXAGON, grip_length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN, head_height: 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN, thread_class: 3A A, grip_diameter: 0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-131-8458, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
VAL22034-6F8
NSN: 5306-01-131-8458
FSC: 5306 — Bolts
CAGE: 06710 — VALLEY-TODECO, INC. DBA ARCONIC FASTENING SYSTEMS (USA)
SPECIFICATIONS
materialSTEEL COMP H11 OVERALL
head_styleDOUBLE HEXAGON
grip_length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
head_height0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
thread_class3A A
grip_diameter0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM IN
thread_length0.374 INCHES MINIMUM AND 0.441 INCHES MAXIMUM IN
surface_finish32.0 MICROINCHES GRIP
fastener_length0.884 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
hardness_rating46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR CADMIUM AND CHROMATE OVERALL
NSN5306-01-131-8458
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: VAL22034-6F8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES GRIP
•
HEAD HEIGHT: 0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.884 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: NAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TYPE 2 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.374 INCHES MINIMUM AND 0.441 INCHES MAXIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES GRIP
HEAD HEIGHT0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM IN
FASTENER LENGTH0.884 INCHES MINIMUM AND 0.931 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TYPE 2 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD LENGTH0.374 INCHES MINIMUM AND 0.441 INCHES MAXIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD STYLEDOUBLE HEXAGON
THREAD DIRECTIONRIGHT-HAND
SUBSTITUTES & CROSS-REFERENCES 3
GB511B6-8Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
VS3071-6F8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
BM17020-6-8AReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy VAL22034-6F8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is VAL22034-6F8?
VAL22034-6F8 is a BOLT,SHEAR.
What parts can replace VAL22034-6F8?
There are 3 known substitutes for VAL22034-6F8: GB511B6-8, VS3071-6F8, BM17020-6-8A. Substitute compatibility should be verified for your specific system.
What is the NSN for VAL22034-6F8?
VAL22034-6F8 is cataloged in the U.S. Government catalog under NSN 5306-01-131-8458. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — VAL22034-6F8

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.