PartsTable
Technical Data Sheet
Download PDF

V9261-0239-0012 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V9261-0239-0012: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, temp_rating: -450.0 FAHRENHEIT AND 2000.0 FAHRENHEIT DEGF, outside_diameter: 1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN, aperture_diameter: 1.047 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN, maximum_pressure_rating: 25000.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-182-3025, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V9261-0239-0012
NSN: 5330-00-182-3025
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
temp_rating-450.0 FAHRENHEIT AND 2000.0 FAHRENHEIT DEGF
outside_diameter1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
aperture_diameter1.047 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
maximum_pressure_rating25000.0 POUNDS PER SQUARE INCH (PSI) LBS
NSN5330-00-182-3025
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V9261-0239-0012 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -450.0 FAHRENHEIT AND 2000.0 FAHRENHEIT DEGF
•
MAXIMUM PRESSURE RATING: 25000.0 POUNDS PER SQUARE INCH (PSI) LBS
•
OUTSIDE DIAMETER: 1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
•
APERTURE DIAMETER: 1.047 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-450.0 FAHRENHEIT AND 2000.0 FAHRENHEIT DEGF
MAXIMUM PRESSURE RATING25000.0 POUNDS PER SQUARE INCH (PSI) LBS
OUTSIDE DIAMETER1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM IN
APERTURE DIAMETER1.047 INCHES MINIMUM AND 1.057 INCHES MAXIMUM IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
VD261-0239-0012Reference document
Same NSN cross-reference
Reference document — Secondary reference
362-594-9012Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy V9261-0239-0012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V9261-0239-0012?
V9261-0239-0012 is a GASKET.
What parts can replace V9261-0239-0012?
There are 2 known substitutes for V9261-0239-0012: VD261-0239-0012, 362-594-9012. Substitute compatibility should be verified for your specific system.
What is the NSN for V9261-0239-0012?
V9261-0239-0012 is cataloged in the U.S. Government catalog under NSN 5330-00-182-3025. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V9261-0239-0012