PartsTable / O-RING / V79117
V79117
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.418 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, center_hole_diameter: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN, cross-sectional_height: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-835-7485, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
V79117
NSN: 5331-00-835-7485 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR hardness_rating 90.0 SHORE DUROMETER A NOMINAL outside_diameter 0.418 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN center_hole_diameter 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN cross-sectional_height 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN NSN 5331-00-835-7485
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: V79117
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
• CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
• CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
• OUTSIDE DIAMETER: 0.418 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING 90.0 SHORE DUROMETER A NOMINAL CENTER HOLE DIAMETER 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN CROSS-SECTIONAL HEIGHT 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN OUTSIDE DIAMETER 0.418 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
179718 Interchangeable interchangeable cross-reference
interchangeable
422450 Interchangeable interchangeable cross-reference
interchangeable
74924 Interchangeable interchangeable cross-reference
interchangeable
005-0003-51A Interchangeable interchangeable cross-reference
interchangeable
546925 Interchangeable interchangeable cross-reference
interchangeable
ARP568-11 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy V79117?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V79117?
V79117 is a O-RING.
What parts can replace V79117?
There are 29 known substitutes for V79117: 179718, 422450, 74924 and 26 more. Substitute compatibility should be verified for your specific system.
Is V79117 still available?
V79117 is currently cancelled.