PartsTable
Technical Data Sheet
Download PDF

V4562V — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V4562V: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM INNER RING, seal_width: 0.6620 INCHES NOMINAL IN, special_features: MATERIAL VITON;OD 4.948, end_item_identification: LGM30;MISSILE MINUTEMAN LGM-30, accommodated_shaft_diameter: 3.003 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-473-2123, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V4562V
NSN: 5330-01-473-2123
FSC: 5330 — Packing and Gasket Materials
CAGE: 0C9X4 — VICKERS TRUCK EQUIPMENT CO (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM INNER RING
seal_width0.6620 INCHES NOMINAL IN
special_featuresMATERIAL VITON;OD 4.948
end_item_identificationLGM30;MISSILE MINUTEMAN LGM-30
accommodated_shaft_diameter3.003 INCHES NOMINAL IN
NSN5330-01-473-2123
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V4562V MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.6620 INCHES NOMINAL IN
•
ACCOMMODATED SHAFT DIAMETER: 3.003 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.6620 INCHES NOMINAL IN
SPECIAL FEATURESMATERIAL VITON;OD 4.948
ACCOMMODATED SHAFT DIAMETER3.003 INCHES NOMINAL IN
END ITEM IDENTIFICATIONLGM30;MISSILE MINUTEMAN LGM-30
MATERIALSTEEL CASE
MATERIALRUBBER FLUOROCARBON CLASS FPM INNER RING
SUBSTITUTES & CROSS-REFERENCES 3
A-1205-N-2588Reference document
Same NSN cross-reference
Reference document — Secondary reference
4562VReference document
Same NSN cross-reference
Reference document — Secondary reference
5330014732123Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy V4562V?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V4562V?
V4562V is a SEAL,PLAIN ENCASED.
What parts can replace V4562V?
There are 3 known substitutes for V4562V: A-1205-N-2588, 4562V, 5330014732123. Substitute compatibility should be verified for your specific system.
What is the NSN for V4562V?
V4562V is cataloged in the U.S. Government catalog under NSN 5330-01-473-2123. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V4562V