PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V419-10-3/8

V419-10-3/8 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,MOUNTING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1019, overall_width: 0.765 INCHES NOMINAL IN, overall_length: 10.375 INCHES NOMINAL IN, surface_treatment: ZINC, material_document_and_classification: ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-124-5271, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V419-10-3/8
NSN: 5340-00-124-5271
FSC: 5340
CAGE: 95021 — DURSTON MANUFACTURING COMPANY DBA VIM TOOLS (USA)
SPECIFICATIONS
materialSTEEL COMP 1019
overall_width0.765 INCHES NOMINAL IN
overall_length10.375 INCHES NOMINAL IN
surface_treatmentZINC
mounting_hole_quantity3
material_document_and_classificationASTM A366 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-124-5271
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V419-10-3/8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: ZINC
•
MATERIAL: STEEL COMP 1019
•
MOUNTING HOLE QUANTITY: 3
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A366 ASSN STD SINGLE MATERIAL RESPONSE
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTZINC
MATERIALSTEEL COMP 1019
OVERALL LENGTH10.375 INCHES NOMINAL IN
MOUNTING HOLE QUANTITY3
OVERALL WIDTH0.765 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A366 ASSN STD SINGLE MATERIAL RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
A269Interchangeable
interchangeable cross-reference
interchangeable
601452Interchangeable
interchangeable cross-reference
interchangeable
22171Interchangeable
interchangeable cross-reference
interchangeable
400279Interchangeable
interchangeable cross-reference
interchangeable
CYB4CInterchangeable
interchangeable cross-reference
interchangeable
BP3592Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V419-10-3/8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V419-10-3/8?
V419-10-3/8 is a BRACKET,MOUNTING.
What parts can replace V419-10-3/8?
There are 6 known substitutes for V419-10-3/8: A269, 601452, 22171 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V419-10-3/8?
V419-10-3/8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-124-5271. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V419-10-3/8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026