PartsTable
Technical Data Sheet
Download PDF

V415 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V415: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1070 OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, coil_quantity: 8-1/4, inside_diameter: 0.820 INCHES MINIMUM AND 0.850 INCHES MAXIMUM IN, style_designator: CYLINDRICAL, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-141-7795, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V415
NSN: 5331-00-141-7795
NIINs: 001417795, 003863255
FSC: 5331 — O-ring
CAGE: 81982 — HYDRO-AIRE AEROSPACE CORP (USA)
SPECIFICATIONS
materialSTEEL COMP 1070 OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
coil_quantity8-1/4
inside_diameter0.820 INCHES MINIMUM AND 0.850 INCHES MAXIMUM IN
style_designatorCYLINDRICAL
surface_treatmentCADMIUM OVERALL
spring_free_length2.000 INCHES NOMINAL IN
spring_solid_length1.313 INCHES NOMINAL IN
center_hole_diameter0.320 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
coil_helix_directionRIGHT-HAND OR LEFT-HAND
cross-sectional_height0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
spring_free_outside_diameter1.144 INCHES MINIMUM AND 1.174 INCHES MAXIMUM IN
NSN5331-00-141-7795
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V415 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.320 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.028 INCHES MINIMUM AND 0.031 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.320 INCHES MINIMUM AND 0.325 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 1
9089448-6Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy V415?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V415?
V415 is a O-RING.
What parts can replace V415?
There is 1 known substitute for V415: 9089448-6. Substitute compatibility should be verified for your specific system.
What is the NSN for V415?
V415 is cataloged in the U.S. Government catalog under NSN 5331-00-141-7795. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V415