PartsTable
Technical Data Sheet
Download PDF

V3E10064 ITEM 006CP — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V3E10064 ITEM 006CP: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, peripheral_diameter: 3.873 INCHES MINIMUM AND 3.875 INCHES MAXIMUM IN, center_hole_diameter: 3.753 INCHES MINIMUM AND 3.757 INCHES MAXIMUM IN, cross-sectional_height: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN, end_item_identification: VALVE MANIFOLD REDUCING., cross-sectional_shape_style: SQUARE/RECTANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-559-2019, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3E10064 ITEM 006CP
NSN: 5330-01-559-2019
FSC: 5330 — Packing and Gasket Materials
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
peripheral_diameter3.873 INCHES MINIMUM AND 3.875 INCHES MAXIMUM IN
center_hole_diameter3.753 INCHES MINIMUM AND 3.757 INCHES MAXIMUM IN
cross-sectional_height0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
end_item_identificationVALVE MANIFOLD REDUCING.
cross-sectional_shape_styleSQUARE/RECTANGULAR
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
NSN5330-01-559-2019
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V3E10064 ITEM 006CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
PERIPHERAL DIAMETER: 3.873 INCHES MINIMUM AND 3.875 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.753 INCHES MINIMUM AND 3.757 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZW
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
PERIPHERAL DIAMETER3.873 INCHES MINIMUM AND 3.875 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.753 INCHES MINIMUM AND 3.757 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONVALVE MANIFOLD REDUCING.
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
MS27595-240CPSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10396107Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS27595-240Reference document
Same NSN cross-reference
Reference document — Secondary reference
V3E10064 ITEM 006Reference document
Same NSN cross-reference
Reference document — Secondary reference
CD-023-36A-32CPReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy V3E10064 ITEM 006CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3E10064 ITEM 006CP?
V3E10064 ITEM 006CP is a RETAINER,PACKING.
What parts can replace V3E10064 ITEM 006CP?
There are 5 known substitutes for V3E10064 ITEM 006CP: MS27595-240CP, 10396107, MS27595-240 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3E10064 ITEM 006CP?
V3E10064 ITEM 006CP is cataloged in the U.S. Government catalog under NSN 5330-01-559-2019. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3E10064 ITEM 006CP

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.