PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V3D10340-24
V3D10340-24 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 1.986 INCHES NOMINAL IN, center_hole_diameter: 1.813 INCHES MINIMUM AND 1.815 INCHES MAXIMUM IN, cross-sectional_height: 0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN, cross-sectional_shape_style: SQUARE/RECTANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-428-9154, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3D10340-24
NSN: 5330-01-428-9154
FSC: 5330
CAGE: 13706 — SONIC CORP. (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter1.986 INCHES NOMINAL IN
center_hole_diameter1.813 INCHES MINIMUM AND 1.815 INCHES MAXIMUM IN
cross-sectional_height0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-428-9154
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V3D10340-24 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 1.986 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER HOLE DIAMETER: 1.813 INCHES MINIMUM AND 1.815 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER1.986 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.052 INCHES MINIMUM AND 0.056 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AS8791 NATIONAL SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER HOLE DIAMETER1.813 INCHES MINIMUM AND 1.815 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
MIL-R-8791/1-133Interchangeable
interchangeable cross-reference
interchangeable
MS28774-133CPInterchangeable
interchangeable cross-reference
interchangeable
5330PL2126036Interchangeable
interchangeable cross-reference
interchangeable
M8791/1-133Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-8791/1-131Interchangeable
interchangeable cross-reference
interchangeable
M8791/1-131CPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V3D10340-24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3D10340-24?
V3D10340-24 is a RETAINER,PACKING.
What parts can replace V3D10340-24?
There are 8 known substitutes for V3D10340-24: MIL-R-8791/1-133, MS28774-133CP, 5330PL2126036 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3D10340-24?
V3D10340-24 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-428-9154. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3D10340-24

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026