PartsTable
Technical Data Sheet
PartsTable / O-RING / V3D10075PC29
V3D10075PC29 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.755 INCHES NOMINAL IN, center_hole_diameter: 1.534 INCHES MINIMUM AND 1.564 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-004-7231, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3D10075PC29
NSN: 5331-01-004-7231
FSC: 5331 — O-RING
CAGE: 99517 — VACCO INDUSTRIES (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter1.755 INCHES NOMINAL IN
center_hole_diameter1.534 INCHES MINIMUM AND 1.564 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
criticality_code_justificationZZZY
material_document_and_classificationMIL-P-5516, CL B MIL SPEC SINGLE MATERIAL RESPONSE
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5331-01-004-7231
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V3D10075PC29 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 1.755 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.534 INCHES MINIMUM AND 1.564 INCHES MAXIMUM IN
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-P-5516, CL B MIL SPEC SINGLE MATERIAL RESPONSE
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
TEMP RATING: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
•
CRITICALITY CODE JUSTIFICATION: ZZZY
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER1.755 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.534 INCHES MINIMUM AND 1.564 INCHES MAXIMUM IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-5516, CL B MIL SPEC SINGLE MATERIAL RESPONSE
ELONGATION PERCENTAGE160 MAXIMUM
TEMP RATING-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
CRITICALITY CODE JUSTIFICATIONZZZY
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
FWH350Interchangeable
interchangeable cross-reference
interchangeable
UFR50P350Interchangeable
interchangeable cross-reference
interchangeable
A50P350Interchangeable
interchangeable cross-reference
interchangeable
MS28775-129Interchangeable
interchangeable cross-reference
interchangeable
04740643Interchangeable
interchangeable cross-reference
interchangeable
1446-129Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V3D10075PC29?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3D10075PC29?
V3D10075PC29 is a O-RING.
What parts can replace V3D10075PC29?
There are 12 known substitutes for V3D10075PC29: FWH350, UFR50P350, A50P350 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3D10075PC29?
V3D10075PC29 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-004-7231. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3D10075PC29

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026