PartsTable
Technical Data Sheet
PartsTable / O-RING / V3D10075 ITEM 30
V3D10075 ITEM 30 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.239 INCHES NOMINAL IN, cross-sectional_height: 0.070 INCHES NOMINAL IN, departure_from_cited_document: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D, criticality_code_justification: ZZZW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-355-2707, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3D10075 ITEM 30
NSN: 5331-01-355-2707
FSC: 5331 — O-RING
CAGE: 99517 — VACCO INDUSTRIES (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.239 INCHES NOMINAL IN
cross-sectional_height0.070 INCHES NOMINAL IN
departure_from_cited_documentCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
criticality_code_justificationZZZW
NSN5331-01-355-2707
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V3D10075 ITEM 30 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC
•
DEPARTURE FROM CITED DOCUMENT: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CENTER HOLE DIAMETER: 0.239 INCHES NOMINAL IN
•
CRITICALITY CODE JUSTIFICATION: ZZZW
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
DEPARTURE FROM CITED DOCUMENTCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER0.239 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZW
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
10117037Interchangeable
interchangeable cross-reference
interchangeable
AS3209-010Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-010Interchangeable
interchangeable cross-reference
interchangeable
DF298851 FIND 7Interchangeable
interchangeable cross-reference
interchangeable
20346-400 FINDInterchangeable
interchangeable cross-reference
interchangeable
AS3085-010Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V3D10075 ITEM 30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3D10075 ITEM 30?
V3D10075 ITEM 30 is a O-RING.
What parts can replace V3D10075 ITEM 30?
There are 9 known substitutes for V3D10075 ITEM 30: 10117037, AS3209-010, M83248/1-010 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3D10075 ITEM 30?
V3D10075 ITEM 30 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-355-2707. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3D10075 ITEM 30

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026