PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V3310
V3310 ✓ Verified by PartsTable
DELL · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

Increase the storage capacity of your system with the 320GB Hard Drive from Dell. Offering a rotational speed of 5.4K RPM, this drive provides fast disk access. Featuring SATA interface, this hard drive delivers enhanced data transfer speeds.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-391-6211, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3310
NSN: 5310-00-391-6211
FSC: 5310
CAGE: 28873 — ITW FOOD EQUIPMENT GROUP LLC DBA HOBART SERVICE (USA)
SPECIFICATIONS
materialWOOL OR COTTON OR CELLULOSE OR GLASS OVERALL
thickness0.125 INCHES NOMINAL IN
hole_diameter0.750 INCHES NOMINAL IN
overall_diameter1.375 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
NSN5310-00-391-6211
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: V3310 · DELL ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THICKNESS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
CENTER HOLE SHAPE STYLE: ROUND
•
MATERIAL: WOOL OR COTTON OR CELLULOSE OR GLASS OVERALL
•
HOLE DIAMETER: 0.750 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
•
OVERALL DIAMETER: 1.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
THICKNESS0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
CENTER HOLE SHAPE STYLEROUND
MATERIALWOOL OR COTTON OR CELLULOSE OR GLASS OVERALL
HOLE DIAMETER0.750 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
OVERALL DIAMETER1.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
FFB171Interchangeable
interchangeable cross-reference
interchangeable
8009Interchangeable
interchangeable cross-reference
interchangeable
C8009X1Interchangeable
interchangeable cross-reference
interchangeable
ASME B94.19Interchangeable
interchangeable cross-reference
interchangeable
1561-0625Interchangeable
interchangeable cross-reference
interchangeable
53410Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V3310?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3310?
V3310 is a WASHER,FLAT manufactured by DELL.
What parts can replace V3310?
There are 17 known substitutes for V3310: FFB171, 8009, C8009X1 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3310?
V3310 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-391-6211. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3310

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026