PartsTable
Technical Data Sheet
Download PDF

V3301X — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V3301X: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include cut_type: RECTANGULAR OVERALL, material: CORK AND RESIN NATURAL OVERALL, joint_type: SCARF-PERIPHERAL OVERALL, peripheral_diameter: 2.187 INCHES MINIMUM AND 2.219 INCHES MAXIMUM IN, center_hole_diameter: 1.609 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN, cross-sectional_height: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-298-5831, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V3301X
NSN: 5330-00-298-5831
FSC: 5330 — Packing and Gasket Materials
CAGE: 65282 — WHITE MOTOR CORP (USA)
SPECIFICATIONS
cut_typeRECTANGULAR OVERALL
materialCORK AND RESIN NATURAL OVERALL
joint_typeSCARF-PERIPHERAL OVERALL
peripheral_diameter2.187 INCHES MINIMUM AND 2.219 INCHES MAXIMUM IN
center_hole_diameter1.609 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
cross-sectional_height0.375 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationHH-C-576,TY 1A,CL 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
NSN5330-00-298-5831
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V3301X MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-C-576,TY 1A,CL 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CUT TYPE: RECTANGULAR OVERALL
•
PERIPHERAL DIAMETER: 2.187 INCHES MINIMUM AND 2.219 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.609 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
•
MATERIAL: CORK AND RESIN NATURAL OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-C-576,TY 1A,CL 3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CUT TYPERECTANGULAR OVERALL
PERIPHERAL DIAMETER2.187 INCHES MINIMUM AND 2.219 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.609 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
MATERIALCORK AND RESIN NATURAL OVERALL
JOINT TYPESCARF-PERIPHERAL OVERALL
SUBSTITUTES & CROSS-REFERENCES 8
K5-16-23Reference document
Same NSN cross-reference
Reference document — Secondary reference
5158859Reference document
Same NSN cross-reference
Reference document — Secondary reference
5-16-23Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
86002Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
824P2Reference document
Same NSN cross-reference
Reference document — Secondary reference
139794Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy V3301X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3301X?
V3301X is a PACKING,PREFORMED.
What parts can replace V3301X?
There are 8 known substitutes for V3301X: K5-16-23, 5158859, 5-16-23 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V3301X?
V3301X is cataloged in the U.S. Government catalog under NSN 5330-00-298-5831. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V3301X