PartsTable / COMPONENT / V3041
V3041
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SEAT,VALVE is a the manufacturer industrial component. Key specifications include material: PLASTIC OVERALL, case_style: SQUARE, seal_width: 0.500 INCHES NOMINAL IN, seat_radius: 0.062 INCHES NOMINAL IN, overall_height: 0.312 INCHES NOMINAL IN, outside_diameter: 2.378 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-285-1346, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
V3041
NSN: 5330-00-285-1346 FSC: 5330 CAGE: 29690 — CORRECT MFG CORP (USA)
SPECIFICATIONS
material PLASTIC OVERALL case_style SQUARE seal_width 0.500 INCHES NOMINAL IN seat_radius 0.062 INCHES NOMINAL IN overall_height 0.312 INCHES NOMINAL IN outside_diameter 2.378 INCHES NOMINAL IN special_features 4 OUTER PERIPHERAL NOTCHES 0.062 IN.WIDE,0.062 IN.DEEP AND 90 DEGREES APART IN style_designator PLAIN surface_treatment PLASTIC CASE body_inside_diameter 1.875 INCHES NOMINAL IN body_outside_diameter 3.938 INCHES NOMINAL IN housing_bore_diameter 2.374 INCHES NOMINAL IN NSN 5330-00-285-1346
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: V3041
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• ACCOMMODATED SHAFT MAXIMUM RATED SPEED: 3000 FEET PER MINUTE FT
• MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
• HOUSING BORE DIAMETER: 2.374 INCHES NOMINAL IN
• OUTSIDE DIAMETER: 2.378 INCHES NOMINAL IN
• SURFACE TREATMENT: PLASTIC CASE
• SEALING ELEMENT STYLE: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLE SQUARE ACCOMMODATED SHAFT MAXIMUM RATED SPEED 3000 FEET PER MINUTE FT MATERIAL RUBBER SYNTHETIC SEALING ELEMENT HOUSING BORE DIAMETER 2.374 INCHES NOMINAL IN OUTSIDE DIAMETER 2.378 INCHES NOMINAL IN MATERIAL STEEL CASE SURFACE TREATMENT PLASTIC CASE SEALING ELEMENT STYLE ANGULAR SEAL WIDTH 0.500 INCHES NOMINAL IN ACCOMMODATED SHAFT DIAMETER 1.375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
13738 Interchangeable interchangeable cross-reference
interchangeable
CH-7402K3 Interchangeable interchangeable cross-reference
interchangeable
7402 Interchangeable interchangeable cross-reference
interchangeable
152023C-2 Interchangeable interchangeable cross-reference
interchangeable
689 Interchangeable interchangeable cross-reference
interchangeable
DD5276 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy V3041?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V3041?
V3041 is a SEAT,VALVE.
What parts can replace V3041?
There are 27 known substitutes for V3041: 13738, CH-7402K3, 7402 and 24 more. Substitute compatibility should be verified for your specific system.
Is V3041 still available?
V3041 is currently cancelled.