V2C11123-21DZ4 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

V2C11123-21DZ4: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 630 OVERALL, head_style: FLAT CHAMFER, head_height: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, thread_length: 2.525 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-309-8548, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

V2C11123-21DZ4

NSN: 5305-01-309-8548
NIINs: 013098548, 016984045
FSC: 5305 — Screws
CAGE: 99517 — VACCO INDUSTRIES (USA)

SPECIFICATIONS

material	STEEL COMP 630 OVERALL
head_style	FLAT CHAMFER
head_height	0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_class	3A A
head_diameter	0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_length	2.525 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
fastener_length	2.625 INCHES NOMINAL IN
thread_direction	RIGHT-HAND
width_across_flats	0.375 INCHES NOMINAL IN
internal_drive_style	HEXAGON
nominal_thread_diameter	0.500 INCHES IN
thread_quantity_per_inch	20
NSN	5305-01-309-8548

COMPONENT DIAGRAM

KEY FEATURES

•

WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN

•

HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN

•

FASTENER LENGTH: 2.625 INCHES NOMINAL IN

•

THREAD LENGTH: 2.525 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL

•

NOMINAL THREAD DIAMETER: 0.500 INCHES IN

•

HEAD STYLE: FLAT CHAMFER

•

THREAD DIRECTION: RIGHT-HAND

TECHNICAL CHARACTERISTICS

WIDTH ACROSS FLATS	0.375 INCHES NOMINAL IN
HEAD HEIGHT	0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
FASTENER LENGTH	2.625 INCHES NOMINAL IN
THREAD LENGTH	2.525 INCHES MINIMUM AND 2.625 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER	0.500 INCHES IN
HEAD STYLE	FLAT CHAMFER
THREAD DIRECTION	RIGHT-HAND
INTERNAL DRIVE STYLE	HEXAGON
THREAD CLASS	3A A

SUBSTITUTES & CROSS-REFERENCES 4

1/2-20X2-5/8 IN LGReference document

Same NSN cross-reference

Reference document — Design control — primary reference

S1E10042 ITEM 29Reference document

Same NSN cross-reference

Reference document — Secondary reference

VC211123-21D24Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-5643-1/2-20 X2-5/8INLGReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy V2C11123-21DZ4?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is V2C11123-21DZ4?

V2C11123-21DZ4 is a SCREW,CAP,SOCKET HEAD.

What parts can replace V2C11123-21DZ4?

There are 4 known substitutes for V2C11123-21DZ4: 1/2-20X2-5/8 IN LG, S1E10042 ITEM 29, VC211123-21D24 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for V2C11123-21DZ4?

V2C11123-21DZ4 is cataloged in the U.S. Government catalog under NSN 5305-01-309-8548. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

V2C11123-21DZ4 — SCREW,CAP,SOCKET HEAD

Request a Quote — V2C11123-21DZ4