PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V24-4-4-HPW/K42-PAI

V24-4-4-HPW/K42-PAI — Technical Data Sheet

✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

VALVE,LINEAR,DIRECTIONAL CONTROL. Key specifications include body_material: STEEL, nominal_thread_size: 1.312 INCHES IN, valve_operation_method: MANUAL, end_item_identification: WATER SUPPLYAND WATER PURIFICATION EQUIPMENT, thread_quantity_per_inch: 12, thread_series_designator: UN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 4820-01-361-3684, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V24-4-4-HPW/K42-PAI
NSN: 4820-01-361-3684
FSC: 4820
CAGE: 09990 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV HYDRAULIC VALVE DIVISION (USA)
SPECIFICATIONS
body_materialSTEEL
spool_quantity2
nominal_thread_size1.312 INCHES IN
flow_pattern_quantity4
valve_operation_methodMANUAL
end_connection_quantity2
end_item_identificationWATER SUPPLYAND WATER PURIFICATION EQUIPMENT
spool_position_quantity4
thread_quantity_per_inch12
thread_series_designatorUN
valve_discharge_flow_rate80.0 GALLONS PER MINUTE
operating_pressure_and_type3500.0 POUNDS PER SQUARE INCH (PSI) HYDRAULIC OIL MAXIMUM REQUIRED AND 242.0 BAR HYDRAULIC OIL MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
NSN4820-01-361-3684
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: V24-4-4-HPW/K42-PAI · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD QUANTITY PER INCH: 12
•
THREAD SERIES DESIGNATOR: UN
•
VALVE DISCHARGE FLOW RATE: 80.0 GALLONS PER MINUTE
•
BODY MATERIAL: STEEL
•
SPOOL POSITION QUANTITY: 4
•
OPERATING PRESSURE AND TYPE: 3500.0 POUNDS PER SQUARE INCH (PSI) HYDRAULIC OIL MAXIMUM REQUIRED AND 242.0 BAR HYDRAULIC OIL MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
•
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED: 130.0 FAHRENHEIT OIL, HYDRAULIC DEGF
•
SPOOL QUANTITY: 2
TECHNICAL CHARACTERISTICS
THREAD QUANTITY PER INCH12
THREAD SERIES DESIGNATORUN
VALVE DISCHARGE FLOW RATE80.0 GALLONS PER MINUTE
BODY MATERIALSTEEL
SPOOL POSITION QUANTITY4
OPERATING PRESSURE AND TYPE3500.0 POUNDS PER SQUARE INCH (PSI) HYDRAULIC OIL MAXIMUM REQUIRED AND 242.0 BAR HYDRAULIC OIL MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
MAXIMUM OPERATING TEMP AND MEDIA FOR WHICH DESIGNED130.0 FAHRENHEIT OIL, HYDRAULIC DEGF
SPOOL QUANTITY2
NOMINAL THREAD SIZE1.312 INCHES IN
FLOW PATTERN QUANTITY4
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
5933055InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
12G1082InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
84700InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
BB17401InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AX6217InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
A-1079InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V24-4-4-HPW/K42-PAI?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V24-4-4-HPW/K42-PAI?
V24-4-4-HPW/K42-PAI is a VALVE,LINEAR,DIRECTIONAL CONTROL.
What parts can replace V24-4-4-HPW/K42-PAI?
There are 8 known substitutes for V24-4-4-HPW/K42-PAI: 5933055, 12G1082, 84700 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V24-4-4-HPW/K42-PAI?
V24-4-4-HPW/K42-PAI is cataloged in the Federal Logistics Information System under NSN 4820-01-361-3684. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V24-4-4-HPW/K42-PAI

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026