PartsTable
Technical Data Sheet
Download PDF

V1E10404-30 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V1E10404-30: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include cut_type: DIAGONAL OVERALL, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-PERIPHERAL RETAINER, peripheral_diameter: 3.491 INCHES MINIMUM AND 3.495 INCHES MAXIMUM IN, center_hole_diameter: 3.251 INCHES MINIMUM AND 3.259 INCHES MAXIMUM IN, cross-sectional_height: 0.048 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-582-1543, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V1E10404-30
NSN: 5330-00-582-1543
FSC: 5330 — Packing and Gasket Materials
CAGE: 99517 — VACCO INDUSTRIES (USA)
SPECIFICATIONS
cut_typeDIAGONAL OVERALL
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-PERIPHERAL RETAINER
peripheral_diameter3.491 INCHES MINIMUM AND 3.495 INCHES MAXIMUM IN
center_hole_diameter3.251 INCHES MINIMUM AND 3.259 INCHES MAXIMUM IN
cross-sectional_height0.048 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
cross-sectional_shape_styleSQUARE/RECTANGULAR
material_document_and_classificationMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-582-1543
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V1E10404-30 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.048 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CUT TYPE: DIAGONAL OVERALL
•
PERIPHERAL DIAMETER: 3.491 INCHES MINIMUM AND 3.495 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 3.251 INCHES MINIMUM AND 3.259 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
JOINT TYPE: SCARF-PERIPHERAL RETAINER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.048 INCHES MINIMUM AND 0.050 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-8791 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CUT TYPEDIAGONAL OVERALL
PERIPHERAL DIAMETER3.491 INCHES MINIMUM AND 3.495 INCHES MAXIMUM IN
CENTER HOLE DIAMETER3.251 INCHES MINIMUM AND 3.259 INCHES MAXIMUM IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-PERIPHERAL RETAINER
SUBSTITUTES & CROSS-REFERENCES 6
MS 28774-236Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
5330PL1043022Reference document
Same NSN cross-reference
Reference document — Informative reference only
MS28774Reference document
Same NSN cross-reference
Reference document — Identification reference
4627780PC13Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
SAE-AS8791Reference document
Same NSN cross-reference
Reference document — Secondary reference
4627781PC13Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy V1E10404-30?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V1E10404-30?
V1E10404-30 is a RETAINER,PACKING.
What parts can replace V1E10404-30?
There are 6 known substitutes for V1E10404-30: MS 28774-236, 5330PL1043022, MS28774 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V1E10404-30?
V1E10404-30 is cataloged in the U.S. Government catalog under NSN 5330-00-582-1543. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V1E10404-30

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.