PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V1642
V1642 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: STEEL OVERALL, cone_width: 1.0594 INCHES NOMINAL IN, head_style: FLAT, stem_style: DRILLED, head_height: 0.1250 INCHES NOMINAL IN, neck_radius: 0.2187 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3630, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V1642
NSN: 3110-00-100-3630
FSC: 3110
CAGE: 29690 — CORRECT MFG CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.0594 INCHES NOMINAL IN
head_styleFLAT
stem_styleDRILLED
head_height0.1250 INCHES NOMINAL IN
neck_radius0.2187 INCHES NOMINAL IN
stem_length3.0000 INCHES MINIMUM AND 3.0100 INCHES MAXIMUM IN
bore_diameter2.0625 INCHES NOMINAL IN
hole_diameter0.1260 INCHES MINIMUM AND 0.1320 INCHES MAXIMUM IN
stem_diameter0.2470 INCHES MINIMUM AND 0.2480 INCHES MAXIMUM IN
chamfer_length0.0312 INCHES NOMINAL IN
outside_diameter1.2970 INCHES MINIMUM AND 1.3070 INCHES MAXIMUM IN
NSN3110-00-100-3630
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: V1642 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.0594 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
BORE DIAMETER: 2.0625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: STEEP ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
CONE WIDTH1.0594 INCHES NOMINAL IN
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
BORE DIAMETER2.0625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORSTEEP ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
RPG10A1Interchangeable
interchangeable cross-reference
interchangeable
GB14D10Interchangeable
interchangeable cross-reference
interchangeable
SPECH21REVISI0NInterchangeable
interchangeable cross-reference
interchangeable
55206Interchangeable
interchangeable cross-reference
interchangeable
31101RInterchangeable
interchangeable cross-reference
interchangeable
VI805Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V1642?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V1642?
V1642 is a RESISTOR,VARIABLE,WIRE WOUND,NON.
What parts can replace V1642?
There are 10 known substitutes for V1642: RPG10A1, GB14D10, SPECH21REVISI0N and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V1642?
V1642 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3630. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V1642

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026