PartsTable
Technical Data Sheet
PartsTable / COMPONENT / V16413
V16413 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC OVERALL, hole_diameter: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, outside_diameter: 5.312 INCHES NOMINAL IN, aperture_diameter: 4.062 INCHES NOMINAL IN, bolt_circle_diameter: 4.688 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-105-2638, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V16413
NSN: 5330-00-105-2638
FSC: 5330
CAGE: 23587 — FRICK CO (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hole_diameter0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
outside_diameter5.312 INCHES NOMINAL IN
aperture_diameter4.062 INCHES NOMINAL IN
bolt_circle_diameter4.688 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
material_document_and_classificationK68 FSCM 49944 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-105-2638
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V16413 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 5.312 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
BOLT CIRCLE DIAMETER: 4.688 INCHES NOMINAL IN
•
APERTURE DIAMETER: 4.062 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: K68 FSCM 49944 MFR REF SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER5.312 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER4.688 INCHES NOMINAL IN
APERTURE DIAMETER4.062 INCHES NOMINAL IN
HOLE DIAMETER0.344 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
MATERIALRUBBER SYNTHETIC OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONK68 FSCM 49944 MFR REF SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
H117Interchangeable
interchangeable cross-reference
interchangeable
DMS 81010BInterchangeable
interchangeable cross-reference
interchangeable
3115546Interchangeable
interchangeable cross-reference
interchangeable
81548Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171Interchangeable
interchangeable cross-reference
interchangeable
2018169Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V16413?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V16413?
V16413 is a GASKET.
What parts can replace V16413?
There are 8 known substitutes for V16413: H117, DMS 81010B, 3115546 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V16413?
V16413 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-105-2638. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V16413

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026