PartsTable
Technical Data Sheet
Download PDF

V1009 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V1009: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.120 INCHES NOMINAL IN, length: 0.500 INCHES NOMINAL IN, material: PLASTIC OVERALL, hole_diameter: 0.156 INCHES NOMINAL IN, overall_height: 1.000 INCHES NOMINAL IN, special_features: BLACK MATERIAL,HOLES 0.750 IN. CTR TO CTR IN.

This part is cataloged in the U.S. Government catalog under NSN 5340-00-158-0033, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V1009
NSN: 5340-00-158-0033
FSC: 5340 — Hardware, Commercial
CAGE: 06915 — RICHCO INC (USA)
SPECIFICATIONS
width1.120 INCHES NOMINAL IN
length0.500 INCHES NOMINAL IN
materialPLASTIC OVERALL
hole_diameter0.156 INCHES NOMINAL IN
overall_height1.000 INCHES NOMINAL IN
special_featuresBLACK MATERIAL,HOLES 0.750 IN. CTR TO CTR IN
loop/holding_dimension0.875 INCHES NOMINAL IN
NSN5340-00-158-0033
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V1009 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.500 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.875 INCHES NOMINAL IN
•
WIDTH: 1.120 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
•
HOLE DIAMETER: 0.156 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.000 INCHES NOMINAL IN
LENGTH0.500 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.875 INCHES NOMINAL IN
SPECIAL FEATURESBLACK MATERIAL,HOLES 0.750 IN. CTR TO CTR IN
WIDTH1.120 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
HOLE DIAMETER0.156 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
80901Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
SM-B-603955Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy V1009?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V1009?
V1009 is a CLIP,SPRING TENSION.
What parts can replace V1009?
There are 2 known substitutes for V1009: 80901, SM-B-603955. Substitute compatibility should be verified for your specific system.
What is the NSN for V1009?
V1009 is cataloged in the U.S. Government catalog under NSN 5340-00-158-0033. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V1009

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.