PartsTable
Technical Data Sheet
Download PDF

V1008 — TRANSISTOR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V1008: TRANSISTOR.

The TRANSISTOR is a the manufacturer industrial component. Key specifications include width: 0.500 INCHES NOMINAL IN, length: 1.000 INCHES NOMINAL IN, material: PLASTIC OVERALL, hole_diameter: 0.156 INCHES NOMINAL IN, overall_height: 0.875 INCHES NOMINAL IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-00-412-2857, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V1008
NSN: 5340-00-412-2857
NIINs: 004122857, 012419774
FSC: 5340 — Hardware, Commercial
CAGE: 06915 — RICHCO INC (USA)
SPECIFICATIONS
width0.500 INCHES NOMINAL IN
length1.000 INCHES NOMINAL IN
materialPLASTIC OVERALL
hole_diameter0.156 INCHES NOMINAL IN
overall_height0.875 INCHES NOMINAL IN
mounting_methodUNTHREADED HOLE(S)
material_thickness0.062 INCHES NOMINAL IN
loop/holding_dimension0.688 INCHES NOMINAL IN
distance_from_loop_center_to_end0.625 INCHES NOMINAL IN
NSN5340-00-412-2857
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V1008 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 1.000 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
LOOP/HOLDING DIMENSION: 0.688 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.625 INCHES NOMINAL IN
•
WIDTH: 0.500 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.875 INCHES NOMINAL IN
LENGTH1.000 INCHES NOMINAL IN
MOUNTING METHODUNTHREADED HOLE(S)
LOOP/HOLDING DIMENSION0.688 INCHES NOMINAL IN
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.625 INCHES NOMINAL IN
WIDTH0.500 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
HOLE DIAMETER0.156 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 2
P40129Reference document
Same NSN cross-reference
Reference document — Secondary reference
139-0030Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy V1008?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V1008?
V1008 is a TRANSISTOR.
What parts can replace V1008?
There are 2 known substitutes for V1008: P40129, 139-0030. Substitute compatibility should be verified for your specific system.
What is the NSN for V1008?
V1008 is cataloged in the U.S. Government catalog under NSN 5340-00-412-2857. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V1008

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.