PartsTable
Technical Data Sheet
PartsTable / O-RING / V0835 3-910
V0835 3-910 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, special_features: THICKNESS IS 0.097 INCH IN, center_hole_diameter: 0.755 INCHES NOMINAL IN, cross-sectional_height: 0.625 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-477-7363, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V0835 3-910
NSN: 5331-01-477-7363
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
special_featuresTHICKNESS IS 0.097 INCH IN
center_hole_diameter0.755 INCHES NOMINAL IN
cross-sectional_height0.625 INCHES NOMINAL IN
NSN5331-01-477-7363
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V0835 3-910 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.625 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.755 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESTHICKNESS IS 0.097 INCH IN
CROSS-SECTIONAL HEIGHT0.625 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.755 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
SF10824 ITEM 17Interchangeable
interchangeable cross-reference
interchangeable
3-910 N674-70Interchangeable
interchangeable cross-reference
interchangeable
16360-310Interchangeable
interchangeable cross-reference
interchangeable
M83485/1-910Interchangeable
interchangeable cross-reference
interchangeable
ST1946-910Interchangeable
interchangeable cross-reference
interchangeable
VUM835 3-910Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy V0835 3-910?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V0835 3-910?
V0835 3-910 is a O-RING.
What parts can replace V0835 3-910?
There are 8 known substitutes for V0835 3-910: SF10824 ITEM 17, 3-910 N674-70, 16360-310 and 5 more. Substitute compatibility should be verified for your specific system.
Is V0835 3-910 still available?
V0835 3-910 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V0835 3-910

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026