PartsTable
Technical Data Sheet
PartsTable / O-RING / V0835 2-112
V0835 2-112 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.482 INCHES MINIMUM AND 0.487 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, specification/standard_data: 81349-MIL-R-83485 AMENDMENT 3,NOTICE 2/INACTIVE/ GOVERNMENT SPECIFICATION. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-483-0851, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V0835 2-112
NSN: 5331-01-483-0851
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
center_hole_diameter0.482 INCHES MINIMUM AND 0.487 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
specification/standard_data81349-MIL-R-83485 AMENDMENT 3,NOTICE 2/INACTIVE/ GOVERNMENT SPECIFICATION
material_document_and_classificationAMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE
NSN5331-01-483-0851
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V0835 2-112 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 0.482 INCHES MINIMUM AND 0.487 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
SPECIFICATION/STANDARD DATA: 81349-MIL-R-83485 AMENDMENT 3,NOTICE 2/INACTIVE/ GOVERNMENT SPECIFICATION
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-R-83485 ASSN STD SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER0.482 INCHES MINIMUM AND 0.487 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TEMP RATING-40.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
SPECIFICATION/STANDARD DATA81349-MIL-R-83485 AMENDMENT 3,NOTICE 2/INACTIVE/ GOVERNMENT SPECIFICATION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
AMS-R-83485/1Interchangeable
interchangeable cross-reference
interchangeable
M83485/1-021Interchangeable
interchangeable cross-reference
interchangeable
5331PL2028324Interchangeable
interchangeable cross-reference
interchangeable
M83485/1-029Interchangeable
interchangeable cross-reference
interchangeable
AMS-R-83485Interchangeable
interchangeable cross-reference
interchangeable
5331012727464Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V0835 2-112?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V0835 2-112?
V0835 2-112 is a O-RING.
What parts can replace V0835 2-112?
There are 27 known substitutes for V0835 2-112: AMS-R-83485/1, M83485/1-021, 5331PL2028324 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V0835 2-112?
V0835 2-112 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-483-0851. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V0835 2-112

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026