PartsTable
Technical Data Sheet
Download PDF

V0769-60-3-904 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

V0769-60-3-904: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, center_hole_diameter: 0.351 INCHES NOMINAL IN, cross-sectional_height: 0.072 INCHES NOMINAL IN, end_item_identification: VALVE GLB 6., part_name_assigned_by_controlling_agency: O-RING. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-613-8174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V0769-60-3-904
NSN: 5331-01-613-8174
FSC: 5331 — O-ring
CAGE: 62144 — PARKER HANNIFIN CORPORATION DIV VILLAGE MARINE TECH (USA)
SPECIFICATIONS
materialRUBBER
center_hole_diameter0.351 INCHES NOMINAL IN
cross-sectional_height0.072 INCHES NOMINAL IN
end_item_identificationVALVE GLB 6.
part_name_assigned_by_controlling_agencyO-RING
NSN5331-01-613-8174
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V0769-60-3-904 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.072 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 0.351 INCHES NOMINAL IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.072 INCHES NOMINAL IN
CENTER HOLE DIAMETER0.351 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING
END ITEM IDENTIFICATIONVALVE GLB 6.
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 2
20453 PC NO 13Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
30-0236Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy V0769-60-3-904?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V0769-60-3-904?
V0769-60-3-904 is a O-RING.
What parts can replace V0769-60-3-904?
There are 2 known substitutes for V0769-60-3-904: 20453 PC NO 13, 30-0236. Substitute compatibility should be verified for your specific system.
What is the NSN for V0769-60-3-904?
V0769-60-3-904 is cataloged in the U.S. Government catalog under NSN 5331-01-613-8174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V0769-60-3-904