PartsTable
Technical Data Sheet
PartsTable / O-RING / V0747 3-908
V0747 3-908 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE SEBACAMIDE, center_hole_diameter: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN, cross-sectional_height: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-094-6968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V0747 3-908
NSN: 5331-00-094-6968
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE SEBACAMIDE
center_hole_diameter0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
cross-sectional_height0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
NSN5331-00-094-6968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V0747 3-908 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE SEBACAMIDE
•
CENTER HOLE DIAMETER: 0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYHEXAMETHYLENE SEBACAMIDE
CENTER HOLE DIAMETER0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.084 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
BK107Interchangeable
interchangeable cross-reference
interchangeable
54-67-6908Interchangeable
interchangeable cross-reference
interchangeable
AMS7276Interchangeable
interchangeable cross-reference
interchangeable
NAS1595-8ESInterchangeable
interchangeable cross-reference
interchangeable
211217Interchangeable
interchangeable cross-reference
interchangeable
TF3-8TInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V0747 3-908?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V0747 3-908?
V0747 3-908 is a O-RING.
What parts can replace V0747 3-908?
There are 9 known substitutes for V0747 3-908: BK107, 54-67-6908, AMS7276 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V0747 3-908?
V0747 3-908 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-094-6968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V0747 3-908

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026