PartsTable
Technical Data Sheet
PartsTable / O-RING / V0747 2-015
V0747 2-015 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include center_hole_diameter: 13.82 MILLIMETERS MINIMUM AND 14.17 MILLIMETERS MAXIMUM MM, cross-sectional_height: 1.70 MILLIMETERS MINIMUM AND 1.85 MILLIMETERS MAXIMUM MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-394-1873, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
V0747 2-015
NSN: 5331-01-394-1873
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
center_hole_diameter13.82 MILLIMETERS MINIMUM AND 14.17 MILLIMETERS MAXIMUM MM
cross-sectional_height1.70 MILLIMETERS MINIMUM AND 1.85 MILLIMETERS MAXIMUM MM
NSN5331-01-394-1873
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: V0747 2-015 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 13.82 MILLIMETERS MINIMUM AND 14.17 MILLIMETERS MAXIMUM MM
•
CROSS-SECTIONAL HEIGHT: 1.70 MILLIMETERS MINIMUM AND 1.85 MILLIMETERS MAXIMUM MM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER13.82 MILLIMETERS MINIMUM AND 14.17 MILLIMETERS MAXIMUM MM
CROSS-SECTIONAL HEIGHT1.70 MILLIMETERS MINIMUM AND 1.85 MILLIMETERS MAXIMUM MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
AS3209-015Interchangeable
interchangeable cross-reference
interchangeable
J221P015Interchangeable
interchangeable cross-reference
interchangeable
675-00015-0Interchangeable
interchangeable cross-reference
interchangeable
NSN SPECIFIC V-22 AE1107C ENGINEInterchangeable
interchangeable cross-reference
interchangeable
AS3085-015Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-015Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy V0747 2-015?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is V0747 2-015?
V0747 2-015 is a O-RING.
What parts can replace V0747 2-015?
There are 7 known substitutes for V0747 2-015: AS3209-015, J221P015, 675-00015-0 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for V0747 2-015?
V0747 2-015 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-394-1873. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — V0747 2-015

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026