PartsTable
Technical Data Sheet
PartsTable / COMPONENT / USAF325B10
USAF325B10 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, nut_style: HEXAGON, nut_height: 0.535 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNF, thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-176-8154, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
USAF325B10
NSN: 5310-00-176-8154
FSC: 5310
CAGE: 80049 — DEPARTMENT OF THE AIR FORCE (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
nut_styleHEXAGON
nut_height0.535 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNF
thread_directionRIGHT-HAND
width_across_flats0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
nominal_thread_size0.625 INCHES IN
thread_quantity_per_inch18
NSN5310-00-176-8154
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: USAF325B10 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNF
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
THREAD QUANTITY PER INCH: 18
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD CLASS: 2B
•
NUT HEIGHT: 0.535 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN
•
MATERIAL: COPPER ALLOY OVERALL
•
WIDTH ACROSS FLATS: 0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD SERIESUNF
NOMINAL THREAD SIZE0.625 INCHES IN
THREAD QUANTITY PER INCH18
THREAD DIRECTIONRIGHT-HAND
THREAD CLASS2B
NUT HEIGHT0.535 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY OVERALL
WIDTH ACROSS FLATS0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM IN
NUT STYLEHEXAGON
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
571242Interchangeable
interchangeable cross-reference
interchangeable
FFB571TYPEA2Interchangeable
interchangeable cross-reference
interchangeable
MILB857Interchangeable
interchangeable cross-reference
interchangeable
43-N-3938-4610Interchangeable
interchangeable cross-reference
interchangeable
H114AInterchangeable
interchangeable cross-reference
interchangeable
FFN836GRADEBTYPE3STYLE4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy USAF325B10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is USAF325B10?
USAF325B10 is a NUT,PLAIN,HEXAGON.
What parts can replace USAF325B10?
There are 19 known substitutes for USAF325B10: 571242, FFB571TYPEA2, MILB857 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for USAF325B10?
USAF325B10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-176-8154. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — USAF325B10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026