PartsTable
Technical Data Sheet
PartsTable / COMPONENT / UBC-006
UBC-006 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include peripheral_diameter: 1.265 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN, center_hole_diameter: 0.940 INCHES MINIMUM AND 0.942 INCHES MAXIMUM IN, cross-sectional_height: 0.179 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN, flanged_body_outside_diameter: 1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-918-7109, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
UBC-006
NSN: 5330-00-918-7109
FSC: 5330
CAGE: 51992 — UNION MACHINE CO OF LYNN, INC (USA)
SPECIFICATIONS
peripheral_diameter1.265 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN
center_hole_diameter0.940 INCHES MINIMUM AND 0.942 INCHES MAXIMUM IN
cross-sectional_height0.179 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
flanged_body_outside_diameter1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
NSN5330-00-918-7109
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: UBC-006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FLANGED BODY OUTSIDE DIAMETER: 1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.940 INCHES MINIMUM AND 0.942 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.265 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.179 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
FLANGED BODY OUTSIDE DIAMETER1.140 INCHES MINIMUM AND 1.160 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.940 INCHES MINIMUM AND 0.942 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.265 INCHES MINIMUM AND 1.285 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.179 INCHES MINIMUM AND 0.181 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
C-2183Interchangeable
interchangeable cross-reference
interchangeable
A-14369Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy UBC-006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is UBC-006?
UBC-006 is a RETAINER,PACKING.
What parts can replace UBC-006?
There are 2 known substitutes for UBC-006: C-2183, A-14369. Substitute compatibility should be verified for your specific system.
What is the NSN for UBC-006?
UBC-006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-918-7109. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — UBC-006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026