UB100-T8-15 — RIVET,BLIND

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

UB100-T8-15: RIVET,BLIND.

The RIVET,BLIND is a the manufacturer industrial component. Key specifications include material: STEEL SLEEVE, head_style: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER), grip_length: 0.906 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN, shank_style: PULL THROUGH HOLLOW SHANK, shank_diameter: 0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN, shear_strength: 5900 SINGLE POUNDS PER SQUARE INCH. This part is cataloged in the U.S.

Government catalog under NSN 5320-01-283-6607, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

UB100-T8-15

NSN: 5320-01-283-6607
FSC: 5320 — Rivets
CAGE: 80539 — SPS TECHNOLOGIES, LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA (USA)

SPECIFICATIONS

material	STEEL SLEEVE
head_style	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
grip_length	0.906 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
shank_style	PULL THROUGH HOLLOW SHANK
shank_diameter	0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
shear_strength	5900 SINGLE POUNDS PER SQUARE INCH
fastener_length	1.193 INCHES NOMINAL IN
expansion_device	SERRATED STEM-TYPE W
countersink_angle	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
surface_treatment	CADMIUM SLEEVE
head_major_diameter	0.431 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
specification/standard_data	96906-MS90353 GOVERNMENT STANDARD
NSN	5320-01-283-6607

COMPONENT DIAGRAM

KEY FEATURES

•

SHANK DIAMETER: 0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.193 INCHES NOMINAL IN

•

EXPANSION DEVICE: SERRATED STEM-TYPE W

•

HEAD STYLE: FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)

•

SPECIFICATION/STANDARD DATA: 96906-MS90353 GOVERNMENT STANDARD

•

GRIP LENGTH: 0.906 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN

•

SHANK STYLE: PULL THROUGH HOLLOW SHANK

•

SURFACE TREATMENT: CADMIUM SLEEVE

TECHNICAL CHARACTERISTICS

SHANK DIAMETER	0.258 INCHES MINIMUM AND 0.260 INCHES MAXIMUM IN
FASTENER LENGTH	1.193 INCHES NOMINAL IN
EXPANSION DEVICE	SERRATED STEM-TYPE W
HEAD STYLE	FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
SPECIFICATION/STANDARD DATA	96906-MS90353 GOVERNMENT STANDARD
GRIP LENGTH	0.906 INCHES MINIMUM AND 0.970 INCHES MAXIMUM IN
SHANK STYLE	PULL THROUGH HOLLOW SHANK
SURFACE TREATMENT	CADMIUM SLEEVE
MINIMUM YIELD STRENGTH	3650 POUNDS PER SQUARE INCH LBS
COUNTERSINK ANGLE	99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM

OTHER ITEMS IN FSC 5320 — Rivets

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5320-00-001-1756 5320-00-001-2042 5320-00-001-3944 5320-00-001-5126 5320-00-001-5151 5320-00-001-5152 5320-00-001-5153

SUBSTITUTES & CROSS-REFERENCES 4

CR7310U-8-15Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS90353U0815Reference document

Same NSN cross-reference

Reference document — Secondary reference

NASM90353Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

UB100-T08-15Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy UB100-T8-15?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is UB100-T8-15?

UB100-T8-15 is a RIVET,BLIND.

What parts can replace UB100-T8-15?

There are 4 known substitutes for UB100-T8-15: CR7310U-8-15, MS90353U0815, NASM90353 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for UB100-T8-15?

UB100-T8-15 is cataloged in the U.S. Government catalog under NSN 5320-01-283-6607. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

UB100-T8-15 — RIVET,BLIND

Request a Quote — UB100-T8-15