PartsTable
Technical Data Sheet
Download PDF

U46283 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

U46283: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 7.520 INCHES MINIMUM AND 8.320 INCHES MAXIMUM IN, housing_bore_diameter: 57.200 INCHES MINIMUM AND 57.300 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 44.400 INCHES MINIMUM AND 44.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-095-3860, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
U46283
NSN: 5330-01-095-3860
FSC: 5330 — Packing and Gasket Materials
CAGE: 75160 — DEERE & CO (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width7.520 INCHES MINIMUM AND 8.320 INCHES MAXIMUM IN
housing_bore_diameter57.200 INCHES MINIMUM AND 57.300 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter44.400 INCHES MINIMUM AND 44.500 INCHES MAXIMUM IN
NSN5330-01-095-3860
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: U46283 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 7.520 INCHES MINIMUM AND 8.320 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
HOUSING BORE DIAMETER: 57.200 INCHES MINIMUM AND 57.300 INCHES MAXIMUM IN
•
CASE STYLE: RECESSED
•
ACCOMMODATED SHAFT DIAMETER: 44.400 INCHES MINIMUM AND 44.500 INCHES MAXIMUM IN
•
MATERIAL: STEEL CASE
TECHNICAL CHARACTERISTICS
SEAL WIDTH7.520 INCHES MINIMUM AND 8.320 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
HOUSING BORE DIAMETER57.200 INCHES MINIMUM AND 57.300 INCHES MAXIMUM IN
CASE STYLERECESSED
ACCOMMODATED SHAFT DIAMETER44.400 INCHES MINIMUM AND 44.500 INCHES MAXIMUM IN
MATERIALSTEEL CASE
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE SEALING ELEMENT
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 2
79X9675Reference document
Same NSN cross-reference
Reference document — Secondary reference
12335303-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy U46283?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is U46283?
U46283 is a SEAL,PLAIN ENCASED.
What parts can replace U46283?
There are 2 known substitutes for U46283: 79X9675, 12335303-2. Substitute compatibility should be verified for your specific system.
What is the NSN for U46283?
U46283 is cataloged in the U.S. Government catalog under NSN 5330-01-095-3860. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — U46283