PartsTable
Technical Data Sheet
Download PDF

U250TSS — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

U250TSS: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OVERALL, overall_width: 3.75 INCHES NOMINAL IN, overall_length: 4.38 INCHES NOMINAL IN, inside_diameter: 2.62 INCHES NOMINAL IN, style_designator: TWO PIECE, lug_hole_diameter: 0.75 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-732-5058, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
U250TSS
NSN: 5340-01-732-5058
FSC: 5340 — Hardware, Commercial
CAGE: 14934 — CLAMPS INC (USA)
SPECIFICATIONS
materialSTEEL COMP 304 OVERALL
overall_width3.75 INCHES NOMINAL IN
overall_length4.38 INCHES NOMINAL IN
inside_diameter2.62 INCHES NOMINAL IN
style_designatorTWO PIECE
lug_hole_diameter0.75 INCHES NOMINAL IN
nominal_thread_size0.375 INCHES IN
end_item_identification4940-01-707-7585
thread_quantity_per_inch16
part_name_assigned_by_controlling_agencySTAINLESS STEEL EXHAUST CLAMP
center_to_center_distance_between_loop_and_mounting_hole3.0 INCHES NOMINAL IN
NSN5340-01-732-5058
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: U250TSS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUG HOLE DIAMETER: 0.75 INCHES NOMINAL IN
•
STYLE DESIGNATOR: TWO PIECE
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
INSIDE DIAMETER: 2.62 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
LUG HOLE DIAMETER0.75 INCHES NOMINAL IN
STYLE DESIGNATORTWO PIECE
OVERALL LENGTH4.38 INCHES NOMINAL IN
OVERALL WIDTH3.75 INCHES NOMINAL IN
NOMINAL THREAD SIZE0.375 INCHES IN
INSIDE DIAMETER2.62 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYSTAINLESS STEEL EXHAUST CLAMP
END ITEM IDENTIFICATION4940-01-707-7585
THREAD QUANTITY PER INCH16
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE3.0 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
1110700767Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy U250TSS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is U250TSS?
U250TSS is a CLAMP,LOOP.
What parts can replace U250TSS?
There is 1 known substitute for U250TSS: 1110700767. Substitute compatibility should be verified for your specific system.
What is the NSN for U250TSS?
U250TSS is cataloged in the U.S. Government catalog under NSN 5340-01-732-5058. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — U250TSS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.